Building and Construction 1,005 practice questions

FE (NCEES) Practice Test

Practise for the FE (NCEES) with 1,005 exam-style questions, an explanation for every answer and stats that show what to study next.

Every answer explainedAn explanation for every answer as you practise.
Progress by topicSee which parts of the FE (NCEES) need more work.
Short or full setsTen-minute sessions or longer timed practice.

FE exam practice test: what this page covers

The 20 free FE exam practice questions on this page were written new for this page. They are not real exam questions. They follow the Other Disciplines outline, because its 14 areas are the general engineering core that every version shares. The real Fundamentals of Engineering (FE) exam, owned by the National Council of Examiners for Engineering and Surveying (NCEES), has 110 questions and 5 hours 20 minutes of exam time, according to NCEES's May 2026 Examinee Guide.

NCEES describes the FE as the usual first step toward a professional engineer (P.E.) license. It is designed for students close to finishing an undergraduate engineering degree and for recent graduates. Below you will find who can sit it, the seven versions, the format and a study split built on NCEES's own weights.

Who can take the FE exam?

Your licensing board decides, not NCEES. Before you register, read your chosen board's approval process, because some boards ask for a separate application and fee. You then create a MyNCEES account, register and pay. Once approved, you have 12 months to test or you forfeit the fee.

The exam is aimed at people from an EAC/ABET-accredited program who are near or just past graduation. NCEES data from 2014 to 2024 favors testing early: first-time takers from ABET programs passed at 71.40 percent before graduation and 70.91 percent within 12 months of it, against 63.89 percent more than 12 months after. These figures describe past takers. They do not predict your result.

Which FE exam version should you take?

There are seven FE exams: Chemical, Civil, Electrical and Computer, Environmental, Industrial and Systems, Mechanical, and Other Disciplines. You choose one at registration. Switching later means canceling and registering again, and you lose a $50 administrative fee. NCEES's specifications effective July 2020 set out what each version covers, so pick the one closest to your degree, confirm it with your board, and download your discipline's current specification from NCEES.

Version Number of knowledge areas Largest areas (questions)
Chemical 17 Material/Energy Balances (10 to 15)
Civil 14 Water Resources and Environmental, Structural, Geotechnical (10 to 15 each)
Electrical and Computer 17 Mathematics; Circuit Analysis (11 to 17 each)
Environmental 15 Fluid Mechanics and Hydraulics; Water and Wastewater (12 to 18 each)
Industrial and Systems 13 Probability and Statistics (10 to 15)
Mechanical 14 Dynamics, Kinematics, and Vibrations; Fluid Mechanics; Thermodynamics; Mechanical Design and Analysis (10 to 15 each)
Other Disciplines 14 Fluid Mechanics (12 to 18)

Every version tests mathematics, ethics and engineering economics. After that, they diverge quickly. Civil adds practice areas such as surveying, geotechnical, transportation and construction engineering. Industrial and Systems gives engineering economics 9 to 14 questions, while no other version's range goes above 9.

FE exam format and the reference handbook

NCEES's May 2026 Examinee Guide sets one format for all seven versions:

Item FE exam
Questions 110, some unscored pretest items you cannot identify
Exam time 5 hours 20 minutes
Full appointment 5 hours 55 minutes: 2 minute nondisclosure agreement, 8 minute tutorial, exam time, 25 minute scheduled break (NCEES's FE page rounds this to 6 hours)
Delivery Computer-based, year-round at Pearson VUE test centers
Units Both SI and US Customary
Fee $225 per attempt, paid to NCEES
Results Pass or fail, typically 7 to 10 days after the exam

The exam is closed book, but NCEES supplies the current FE Reference Handbook on screen as a searchable PDF, and every examinee tests on a 24-inch monitor with room for the question and the handbook. Ctrl+F does not work, so you search with the box on the left of the handbook. The same current handbook is free in your MyNCEES account, so study with it from day one and learn where each formula sits. No design standards are supplied for the FE.

Most questions are multiple choice with one answer. Others ask you to pick several correct options, point and click, drag and drop, or type a number. Each item is scored right or wrong, with no partial credit. The free questions here all use four options. Most use SI units and one uses US Customary, because the real exam uses both.

Two timing rules trip people up. You get all of your exam time at the start, and after roughly half the questions you review and submit that section, then lose access to it. Unscheduled breaks come out of your exam time, so the clock keeps running while you are away.

How to split FE study time by official weights

NCEES gives a range of questions for each area, not a percentage. Taking the midpoint of each Other Disciplines range gives the shares below (the midpoints total 126.5). If you plan 100 hours of study, treat the hours column as a starting point.

Other Disciplines area Midpoint Share Hours of 100
Fluid Mechanics 15 11.9% 12
Statics; Dynamics; Strength of Materials; Thermodynamics and Heat Transfer 11.5 each 9.1% each 9 each
Mathematics 10 7.9% 8
Probability and Statistics; Safety, Health, and Environment; Engineering Economics; Materials; Basic Electrical Engineering 7.5 each 5.9% each 6 each
Chemistry; Engineering Ethics and Societal Impacts 6.5 each 5.1% each 5 each
Instrumentation and Controls 5 4.0% 4

For another version, run the same sum on its specification. Then shift hours toward your weak areas, which an early diagnostic practice set will show you. Ethics and economics repay a few focused hours, because the same methods come up again and again. Practice with the on-screen handbook and your approved calculator, and finish with timed sets of about 55 questions to rehearse the mid-exam lock. The full VirtuePrep bank has 1,005 FE (NCEES) questions, with an explanation for every answer.

How hard is the FE exam?

NCEES's own data is the fairest measure. Its Squared 2024 report, covering October 1, 2023 to September 30, 2024, gives these pass rates:

Version First-time takers First-time, EAC/ABET degree Repeat takers
Chemical 72% 73% 34%
Civil 60% 63% 33%
Electrical and Computer 62% 64% 30%
Environmental 67% 70% 36%
Industrial and Systems 68% 73% 25%
Mechanical 68% 71% 35%
Other Disciplines 59% 61% 27%

Repeat takers pass at far lower rates than first-time takers in every version. NCEES does not publish the passing score, and both groups are graded to the same standard. If you need a retake, NCEES allows one attempt per testing window (January to March, April to June, July to September, October to December) and no more than three in any 12 months. Some boards are stricter.

Related pages: EPA 608, LEED Green Associate and the full exam list.

20 free FE (NCEES) practice questions

Answer each one yourself, then open the answer. No account needed. These are study questions, not real exam questions.

  1. An engineer solving a sizing equation reduces it to f(x) = x^3 + 2x - 20 = 0, where x is a length in meters. Starting from x0 = 2.0 m, what is x1 after one Newton-Raphson iteration?

    1. 1.429 m
    2. 2.667 m
    3. 2.571 m
    4. 2.400 m
    Show answer

    Answer: C. Newton's method uses x1 = x0 - f(x0)/f'(x0). Here f(2) = 8 + 4 - 20 = -8 and f'(x) = 3x^2 + 2, so f'(2) = 14. Then x1 = 2 - (-8/14) = 2 + 0.571 = 2.571 m. Dropping the 2 from the derivative gives 2.667 m, and a sign slip gives 1.429 m.

    Source: NIST Digital Library of Mathematical Functions, 3.8 Nonlinear Equations (Newton's rule)

  2. The free displacement y(t) of a damped machine mount obeys y'' + 4y' + 13y = 0. Which statement describes the response?

    1. It oscillates at 3 rad/s inside a decaying envelope e^(-2t)
    2. It oscillates at 3.61 rad/s with no decay
    3. It oscillates at 2 rad/s inside a decaying envelope e^(-3t)
    4. It returns to rest without oscillating because it is overdamped
    Show answer

    Answer: A. The characteristic equation r^2 + 4r + 13 = 0 has roots r = (-4 plus or minus the square root of (16 - 52))/2 = -2 plus or minus 3i. Complex roots mean y = e^(-2t)(C1 cos 3t + C2 sin 3t): an oscillation at 3 rad/s that decays. The value 3.61 rad/s is the square root of 13, the undamped natural frequency, and the third option swaps the real and imaginary parts.

    Source: HyperPhysics (Georgia State University), Damped Harmonic Oscillator

  3. A lab tests 16 bolts from a new supplier. The sample mean tensile strength is 812 MPa and the sample standard deviation is 24 MPa. Using t = 2.131 for 15 degrees of freedom, what is the 95 percent confidence interval for the mean strength?

    1. 800 to 824 MPa
    2. 761 to 863 MPa
    3. 806 to 818 MPa
    4. 799 to 825 MPa
    Show answer

    Answer: D. With an unknown population standard deviation, the interval is the mean plus or minus t times s divided by the square root of n. The standard error is 24/4 = 6 MPa, and 2.131 x 6 = 12.8 MPa, giving 799.2 to 824.8 MPa, or about 799 to 825 MPa. Using z = 1.96 gives 800 to 824, which is too narrow for a sample of 16. Forgetting to divide by the square root of n gives 761 to 863.

    Source: NIST/SEMATECH e-Handbook of Statistical Methods, Confidence Limits for the Mean

  4. A plant must neutralize 2.0 m^3 of rinse water at pH 2.0 before discharge. Treat the acidity as a fully dissociated strong monoprotic acid and ignore buffering. About how much sodium hydroxide (NaOH, molar mass 40.0 g/mol) is needed to reach neutral?

    1. 8.0 kg
    2. 0.80 kg
    3. 0.40 kg
    4. 0.080 kg
    Show answer

    Answer: B. At pH 2.0 the hydrogen ion concentration is 10^-2 = 0.010 mol/L. The tank holds 2.0 m^3 = 2,000 L, so it contains 0.010 x 2,000 = 20 mol of H+. NaOH supplies one OH- per formula unit, so 20 mol x 40.0 g/mol = 800 g = 0.80 kg. Reading pH 2 as 0.1 mol/L gives 8.0 kg, ten times too much.

    Source: OpenStax Chemistry 2e, 14.2 pH and pOH

  5. An accelerometer on a gearbox picks up a strong 450 Hz component. The data logger samples at 600 Hz and has no anti-aliasing filter. At what frequency will the 450 Hz component appear in the recorded data?

    1. 150 Hz
    2. 450 Hz
    3. 300 Hz
    4. 1,050 Hz
    Show answer

    Answer: A. The Nyquist frequency is half the sampling rate, 300 Hz. A 450 Hz signal is above it, so it folds back and appears at the sampling rate minus the signal frequency: 600 - 450 = 150 Hz. To record 450 Hz faithfully you would need to sample above 900 Hz, or filter it out before sampling.

    Source: Engineering LibreTexts, Signals and Systems (Baraniuk et al.), 10.5 Aliasing Phenomena

  6. While inspecting an occupied warehouse for a private client, a consulting engineer finds a roof truss connection that could fail under the next heavy snow load. The client says repairs can wait until next year and reminds the engineer that the report is confidential. Under the NSPE Code of Ethics, what should the engineer do?

    1. Keep the finding confidential, as the contract requires, and note it in the file
    2. Withdraw from the project so the decision passes to the client's next consultant
    3. Notify the client in writing, then the building official if the client refuses
    4. Send the client a repair recommendation and treat the owner's choice as final
    Show answer

    Answer: C. The first fundamental canon is to hold the safety, health and welfare of the public paramount. When an engineer's judgment is overruled in circumstances that endanger life or property, the NSPE rules of practice say to notify the employer or client and such other authority as may be appropriate, which here is the building official. Confidentiality and the owner's preference do not outweigh a danger to occupants. Reporting duties under state law vary, so this answer is based on the NSPE code.

    Source: NSPE Code of Ethics for Engineers

  7. Before entry into a permit-required confined space, an attendant records several readings. Under the OSHA definition of a hazardous atmosphere in 29 CFR 1910.146, which single reading makes the atmosphere hazardous?

    1. Flammable gas at 8 percent of its lower flammable limit
    2. Oxygen at 19.2 percent by volume
    3. Oxygen at 23.0 percent by volume
    4. Combustible dust that limits visibility to about 10 feet
    Show answer

    Answer: B. OSHA defines an oxygen-deficient atmosphere as below 19.5 percent oxygen by volume, so 19.2 percent is hazardous. Oxygen becomes a hazard on the high side only above 23.5 percent. Flammable gas becomes a hazard above 10 percent of its lower flammable limit, and OSHA's note approximates hazardous dust as dust that obscures vision at 5 feet or less. The same standard requires testing in a set order: oxygen first, then combustible gases and vapors, then toxic gases and vapors.

    Source: OSHA 29 CFR 1910.146, Permit-required confined spaces

  8. A pump upgrade costs $18,000 now and saves $4,000 in energy at the end of each year for 6 years, with no salvage value. At an interest rate of 8 percent per year, what is the net present worth, and should the upgrade go ahead on this basis?

    1. About +$6,000, so the upgrade pays off
    2. About -$2,880, so it should be rejected
    3. About -$580, so it should be rejected
    4. About +$490, so the upgrade pays off
    Show answer

    Answer: D. The uniform series present worth factor is (P/A, 8%, 6) = (1 - 1.08^-6)/0.08 = 4.6229. Savings are worth 4,000 x 4.6229 = $18,492 today, so the net present worth is 18,492 - 18,000 = +$492, about +$490, and the upgrade is acceptable. Ignoring interest gives +$6,000, using 10 percent gives about -$580, and discounting all savings as one sum at year 6 gives about -$2,880.

    Source: NCEES FE Other Disciplines CBT Exam Specifications, July 2020

  9. A simply supported beam spans 6 m between a pin at A and a roller at B. It carries a uniform load of 3 kN/m over its full length and a 12 kN point load 2 m from A. What is the vertical reaction at A?

    1. 17 kN
    2. 13 kN
    3. 15 kN
    4. 21 kN
    Show answer

    Answer: A. The uniform load totals 3 x 6 = 18 kN acting at midspan, 3 m from A. Summing moments about A: R_B x 6 = 12 x 2 + 18 x 3 = 78 kN·m, so R_B = 13 kN. Vertical equilibrium gives R_A = 12 + 18 - 13 = 17 kN. The 13 kN option is the reaction at B, and 15 kN wrongly splits the total load evenly.

    Source: HyperPhysics (Georgia State University), Torque and Equilibrium

  10. A 50 kg crate rests on a ramp inclined at 25 degrees. The coefficient of static friction is 0.30, and g = 9.81 m/s^2. What is the smallest force, applied parallel to the ramp and pointing up the slope, that keeps the crate from sliding down?

    1. 207 N
    2. 341 N
    3. 73.9 N
    4. 133 N
    Show answer

    Answer: C. The weight is 50 x 9.81 = 490.5 N. Its component down the slope is 490.5 sin 25 = 207.3 N, and the normal force is 490.5 cos 25 = 444.5 N, so maximum static friction is 0.30 x 444.5 = 133.4 N. Since tan 25 = 0.466 is above 0.30, the crate would slide unaided. Friction acts up the slope to resist sliding, so the holding force is 207.3 - 133.4 = 73.9 N. The value 341 N is the force needed to start pushing it up the ramp.

    Source: HyperPhysics (Georgia State University), Friction

  11. A test vehicle traveling at 25 m/s brakes with all wheels locked on a surface where the coefficient of kinetic friction is 0.70. Taking g = 9.81 m/s^2 and ignoring air resistance, how far does it travel before stopping?

    1. 91.0 m
    2. 45.5 m
    3. 31.9 m
    4. 22.3 m
    Show answer

    Answer: B. By the work-energy principle, friction work equals the lost kinetic energy: mu m g d = m v^2 / 2. Mass cancels, so d = v^2/(2 mu g) = 625/(2 x 0.70 x 9.81) = 45.5 m. Dropping the 2 gives 91.0 m, ignoring the friction coefficient gives 31.9 m, and multiplying by it instead of dividing gives 22.3 m.

    Source: HyperPhysics (Georgia State University), Auto Stopping Distance

  12. A 20 kg instrument package sits on isolation springs with a combined stiffness of 8,000 N/m. Treating it as an undamped single-degree-of-freedom system, what is its natural frequency in hertz?

    1. 20.0 Hz
    2. 6.37 Hz
    3. 126 Hz
    4. 3.18 Hz
    Show answer

    Answer: D. The natural angular frequency is the square root of k/m = the square root of (8,000/20) = 20.0 rad/s. Converting to hertz divides by 2 pi: 20.0/6.283 = 3.18 Hz. The 20.0 Hz option forgets the conversion, and 126 Hz multiplies by 2 pi instead of dividing.

    Source: HyperPhysics (Georgia State University), Simple Harmonic Motion

  13. A steel tie rod 20 mm in diameter and 2.5 m long carries an axial tensile load of 40 kN. With E = 200 GPa, how much does the rod lengthen?

    1. 0.398 mm
    2. 1.59 mm
    3. 6.37 mm
    4. 0.159 mm
    Show answer

    Answer: B. The area is pi d^2 / 4 = pi x 0.020^2 / 4 = 3.142 x 10^-4 m^2, so the stress is 127 MPa, and the rod is assumed to stay elastic. Elongation is PL/(AE) = (40,000 x 2.5)/(3.142 x 10^-4 x 200 x 10^9) = 1.59 x 10^-3 m = 1.59 mm. Using the diameter in place of the radius gives 0.398 mm, and using half the radius gives 6.37 mm.

    Source: HyperPhysics (Georgia State University), Elasticity, Elastic Properties

  14. A thin-walled cylindrical air receiver has a mean diameter of 1.5 m and a wall thickness of 10 mm. At an internal gauge pressure of 1.2 MPa, what is the hoop (circumferential) stress in the wall, away from the heads?

    1. 45 MPa
    2. 180 MPa
    3. 90 MPa
    4. 135 MPa
    Show answer

    Answer: C. For a thin-walled cylinder, hoop stress = p r / t = 1.2 x 0.75 / 0.010 = 90 MPa. The longitudinal stress is half that, p r / (2t) = 45 MPa, so the hoop direction governs the wall design. Using the diameter instead of the radius gives 180 MPa.

    Source: Engineering LibreTexts, Mechanics of Materials (Roylance), 2.2 Pressure Vessels

  15. An aluminum facade mullion is 6.0 m long, and its service temperature ranges from -10 °C to 40 °C. The linear expansion coefficient of the alloy is 23 x 10^-6 per °C. What total length change must the movement joint allow over that range?

    1. 6.9 mm
    2. 3.6 mm
    3. 4.1 mm
    4. 13.8 mm
    Show answer

    Answer: A. Linear expansion is change in length = original length x alpha x change in temperature. The range is 40 - (-10) = 50 °C, so 6,000 mm x 23 x 10^-6 x 50 = 6.9 mm. Using 12 x 10^-6 per °C, a value near steel's rather than aluminum's, gives 3.6 mm, and treating the range as 40 - 10 = 30 °C gives 4.1 mm.

    Source: HyperPhysics (Georgia State University), Thermal Expansion

  16. An open tank holds a 10 ft layer of oil (specific gravity 0.80) floating on 6 ft of water. Taking the unit weight of water as 62.4 lb/ft^3, what is the gauge pressure at the tank floor?

    1. 6.93 psi
    2. 5.55 psi
    3. 6.41 psi
    4. 6.07 psi
    Show answer

    Answer: D. Static pressure adds up layer by layer, and each layer contributes its unit weight times its depth. The oil adds 0.80 x 62.4 x 10 = 499.2 lb/ft^2 and the water adds 62.4 x 6 = 374.4 lb/ft^2, for 873.6 lb/ft^2. Dividing by 144 in^2 per ft^2 gives 6.07 psi gauge. Treating all 16 ft as water gives 6.93 psi, all as oil gives 5.55 psi, and swapping the layer depths gives 6.41 psi.

    Source: HyperPhysics (Georgia State University), Static Fluid Pressure

  17. Water (density 1,000 kg/m^3) flows through a horizontal pipe that reduces from 100 mm to 50 mm diameter. Upstream, the velocity is 2.0 m/s and the pressure is 200 kPa. Ignoring losses, what is the pressure in the 50 mm section?

    1. 194 kPa
    2. 170 kPa
    3. 140 kPa
    4. 230 kPa
    Show answer

    Answer: B. Continuity gives V2 = V1 (D1/D2)^2 = 2.0 x 4 = 8.0 m/s. Bernoulli for a horizontal pipe gives p2 = p1 - (rho/2)(V2^2 - V1^2) = 200,000 - 500 x (64 - 4) = 170,000 Pa = 170 kPa. Scaling velocity by the diameter ratio instead of its square gives 194 kPa, and leaving out the one half gives 140 kPa.

    Source: HyperPhysics (Georgia State University), Bernoulli Equation

  18. A single-phase induction motor is supplied at 240 V rms. An ammeter reads 20 A rms and a wattmeter reads 3.84 kW. What is the motor's power factor?

    1. 0.80 lagging
    2. 0.80 leading
    3. 0.60 lagging
    4. 1.25 lagging
    Show answer

    Answer: A. Apparent power is 240 x 20 = 4,800 VA, and power factor is real power divided by apparent power: 3,840/4,800 = 0.80. An induction motor is an inductive load, so current lags voltage and the power factor is lagging. A power factor can never exceed 1, so 1.25 comes from dividing the wrong way.

    Source: HyperPhysics (Georgia State University), Power Factor for AC Power

  19. A vendor proposes a heat engine that takes heat from a source at 527 °C and rejects heat to surroundings at 27 °C. What is the highest thermal efficiency any engine could reach between these two temperatures?

    1. 94.9%
    2. 37.5%
    3. 62.5%
    4. 43.1%
    Show answer

    Answer: C. The Carnot efficiency, 1 - T_cold/T_hot, is the upper limit, and it needs absolute temperatures. Converting gives 800 K and 300 K, so the limit is 1 - 300/800 = 0.625, or 62.5 percent. Using Celsius values gives 94.9 percent, far too high, and 37.5 percent is the ratio itself rather than one minus it.

    Source: HyperPhysics (Georgia State University), Carnot Cycle

  20. A cold-store wall is 15 m^2 in area and 200 mm thick, with a thermal conductivity of 0.80 W/(m·K). The inside face is at -5 °C and the outside face at 20 °C. At steady state, what is the conduction heat flow through the wall?

    1. 900 W
    2. 100 W
    3. 15,000 W
    4. 1,500 W
    Show answer

    Answer: D. Steady one-dimensional conduction is q = k A (T_hot - T_cold) / L. The temperature difference is 20 - (-5) = 25 K, so q = 0.80 x 15 x 25 / 0.200 = 1,500 W. Treating the difference as 15 K gives 900 W, entering the thickness as 0.020 m gives 15,000 W, and 100 W is the flux per square meter, not the total.

    Source: HyperPhysics (Georgia State University), Heat Conduction

Practise all 1,005 questions

What you get with VirtuePrep FE (NCEES) prep

  • 1,005 practice questions built around the topics the FE (NCEES) tests.
  • An explanation for every answer, so each mistake teaches you something.
  • Stats and history that show your weakest topics first.
  • Web, iPhone and Android, so you can study wherever you have ten minutes.

FE (NCEES) practice test questions people ask

How much does the FE exam cost?
NCEES charges $225 per attempt, the fee since January 1, 2024. Some licensing boards add their own application fee, and testing through a foreign entity adds a $25 international scheduling fee. To reschedule or cancel an appointment, you must act at least 48 hours ahead and pay Pearson $50.
What is the passing score for the FE exam?
NCEES does not publish one. Your correct answers are converted to a scaled score that evens out small differences between exam forms, and you only see pass or fail. Wrong answers cost nothing, so answer every question.
What is the FE exam pass rate?
NCEES's Squared 2024 report, covering October 1, 2023 to September 30, 2024, lists first-time pass rates from 59 percent (Other Disciplines) to 72 percent (Chemical). Repeat takers passed at 25 to 36 percent. The full table by discipline is on this page.
How long does it take to get FE exam results?
NCEES's May 2026 Examinee Guide says results typically arrive by email 7 to 10 days after the exam, and you view them in your MyNCEES account. If you fail, you also get a diagnostic report showing how you did in each knowledge area.
What calculators are allowed on the FE exam?
You may bring one calculator from the NCEES list: Casio models whose name contains fx-115 or fx-991, the HP 33s or HP 35s, or Texas Instruments models whose name contains TI-30X or TI-36X. NCEES states this list for exams through 2027, and its May 2026 Examinee Guide says an on-screen TI-30XS is also available.
What is the difference between the FE exam and the PE exam?
The FE is usually the first exam on the path to a professional engineer (P.E.) license and is aimed at students and recent graduates. The PE comes later: on the typical path NCEES describes, you pass the FE, gain about four years of qualifying experience, then pass the PE. Many states also offer other paths, so check your board.
Is the FE exam the same as the EIT?
Many people say EIT, but NCEES documents use engineer intern (E.I.). Passing the FE is the exam part. You then apply to your licensing board, not NCEES, for E.I. certification, so ask your board what it requires.

Sources

VirtuePrep is not affiliated with or endorsed by the organisation that runs the FE (NCEES). Exam names are trademarks of their owners. Practice questions are written for study and are not real exam questions. Page updated 2026-11-12.

Start your FE (NCEES) prep today

Answer your first question in under a minute. Free to try.

Start practising