Security 320 practice questions

CRISC Practice Test

Practise for the CRISC with 320 exam-style questions, an explanation for every answer and stats that show what to study next.

Every answer explainedAn explanation for every answer as you practise.
Progress by topicSee which parts of the CRISC need more work.
Short or full setsTen-minute sessions or longer timed practice.

What is the CRISC exam?

Certified in Risk and Information Systems Control (CRISC) is ISACA's certification for IT risk and control work. The exam has 150 multiple-choice questions in four hours, and you pass with a scaled score of 450 or higher on a 200 to 800 scale.

The free CRISC practice test on this page has 20 newly written questions, spread by the official domain weights. They are not real exam questions, and a score on them does not predict your result.

Check your study materials first. ISACA's April 2025 press release says the current outline took effect on November 3, 2025, and it moved 2 points from Technology and Security to Risk Assessment.

Who can take the CRISC exam?

You can sit the exam before you have the experience, but passing does not make you certified. To certify, ISACA requires:

  • Three or more years of CRISC work experience, across at least two of the four domains
  • That experience gained within the 10 years before you apply
  • An application within five years of passing, with a one-time US$50 fee

The candidate guide says CRISC has no experience waivers or substitutions. If you are short of three years, work out when you will reach them and set your exam date so the application still falls inside that five-year window.

CRISC exam format and passing score

The CRISC exam is a computer-based multiple-choice test taken at an authorized PSI test center or through remote proctoring. These facts come from ISACA's 2026 candidate guide and the CRISC pages.

Item Current rule
Questions 150, each with four options
Time 4 hours, which averages 96 seconds per question
Scoring Scaled, 200 to 800. Passing is 450 or higher
Wrong answers No penalty, so answer everything
Unscored items Pretest items are mixed in. The candidate guide does not say how many
Domain results Informational only. The pass decision uses your total
Results Preliminary status on screen at the end. Official score within ten working days
Scheduling Continuous. Book from 48 hours after payment, within a six-month eligibility period. If you do not test in that period and have not bought an extension, you forfeit the fees

Questions can turn on qualifiers such as BEST or MOST likely, so a true option can still be the wrong pick. You are looking for the strongest one. A weak domain cannot fail you by itself, but it still costs points on your total.

ISACA's 2026 candidate guide allows one break of up to ten minutes with your proctor's permission, and the exam timer keeps running. Its exam day rules also mention "two breaks" of 10 minutes or less in the table on leaving the testing area, and those rules cover test centers and remote exams alike, so confirm the limit with ISACA before you plan around more than one.

What does the CRISC exam cover?

CRISC has four domains: Governance, Risk Assessment, Risk Response and Reporting, and Technology and Security. ISACA's current outline gives Risk Response and Reporting the most weight, at 32%.

Domain Weight What it covers
1. Governance 26% Strategy, culture, policies, resilience, assets, ERM, lines of defense, appetite and tolerance, legal duties
2. Risk Assessment 22% Threat modeling, vulnerabilities, scenarios, business impact analysis, risk register, inherent and residual risk
3. Risk Response and Reporting 32% Response options, ownership, vendor risk, exceptions, control design and testing, action plans, KRIs, KCIs and KPIs, reporting
4. Technology and Security 20% Architecture, operations, SDLC, data lifecycle, recovery, emerging technologies, security principles, privacy

ISACA's main CRISC page still labels Domain 1 "Corporate IT Governance". The outline, the candidate guide and the press release all say "Governance", so treat them as the same domain.

How should you split CRISC study time?

Start from the official weights, then move hours toward whatever a timed practice set shows you are missing. Per 100 study hours, the weights give the split below. That is arithmetic, not a recommended total, because we found no study hours from ISACA.

Domain Hours per 100 Decisions to practice
Governance 26 Who sets appetite and who owns a risk, and what each line of defense should and should not do
Risk Assessment 22 Writing a scenario a manager can act on, and rating residual risk from how a control really operates
Risk Response and Reporting 32 Choosing a response, handling an exception, picking a true KRI, and spotting a plan that was closed too early
Technology and Security 20 Reading a recovery gap, a sanitization choice, or an AI use case as a business risk

If you already score well in Technology and Security, move some of those hours to the domain where you miss the most. Keep some time in all four, because every domain counts toward your total.

How is CRISC different from CISA and CISM?

All three are ISACA exams with 150 questions in four hours, but they ask different questions about the same facts. Take this example, which is our own illustration based on the outlines: access reviews for a critical vendor system are six months overdue.

  • CRISC asks whether that exposure is within tolerance, who owns it, which response fits, and which indicator should have flagged it.
  • CISA asks what evidence supports the finding and how to report it as audit assurance.
  • CISM asks how the security program should run that review process and how the team responds if an account is misused.
Exam Experience Current weights
CRISC 3+ years, no waivers Governance 26, Risk Assessment 22, Risk Response and Reporting 32, Technology and Security 20
CISM 5+ years, waivers up to 2 years Security Governance 18, Security Risk Management 20, Security Program 33, Incident Management 29
CISA 5+ years, waivers up to 3 years Auditing Process 18, Governance and Management of IT 18, Acquisition, Development and Implementation 12, Operations and Resilience 26, Protection of Information Assets 26

ISACA's CISM weights changed on November 3, 2026, so comparison pages written before that date may show older figures. If you are also weighing CISSP, it comes from a different owner, ISC2, which lists five years of required work experience. You can browse other certifications on the exams page.

What does CRISC cost from exam to certification?

The first attempt and application cost US$625 for ISACA members and US$810 for nonmembers, using the fees ISACA lists. Those figures leave out membership dues and study materials.

Step Fee or rule
Exam US$575 members, US$760 nonmembers. Nonrefundable and nontransferable
Application after passing US$50, once
Eligibility extension One six-month extension, US$75
Retakes Up to four attempts in a rolling 12 months, with waits of 30, 90 and 90 days. Full fee each time
Annual maintenance US$45 members, US$85 nonmembers. US$25 and US$50 for a third or later ISACA certification
CPE At least 20 hours a year and 120 over three years

From January 1, 2027, ISACA's policy changes require at least 90 of the 120 hours to align with the CRISC outline, and vendor sales or marketing demos no longer count. Renewal falls at the end of each calendar year. The CPE policy says December 31 and the Maintain CRISC page says January 1, so December 31 is the safer date to work to.

How to use the CRISC practice test

Take the 20 questions in one sitting at about 96 seconds each, which is 32 minutes. Then sort your misses by domain and read the explanation for every answer, including the ones you got right by guessing.

The set follows the outline's balance as closely as 20 questions allow: 5, 4, 7 and 4 across Domains 1 to 4. After that, VirtuePrep's CRISC question bank has 320 questions if you want more timed practice. No practice set can promise a pass.

20 free CRISC practice questions

Answer each one yourself, then open the answer. No account needed. These are study questions, not real exam questions.

  1. A retailer's board has made same-day delivery its main goal for the next two years, and that goal depends on a new dispatch application. The IT risk register ranks an internal test server first because of its technical severity score and places the dispatch application near the bottom. What should the risk practitioner recommend?

    1. Keep the technical ranking and add a note about the new delivery goal to the register
    2. Rescore the register entries by their likely impact on business objectives
    3. Fix the test server first, then review the dispatch application at the next annual cycle
    4. Move the dispatch application to first place and leave the other rankings as they are
    Show answer

    Answer: B. A register supports enterprise decisions when each risk is judged against mission and business objectives. Technical severity is one input, but it says little about what the board is trying to achieve. Moving a single entry by hand would fix this one case and leave the flawed method in place.

    Source: NIST IR 8286 Rev. 1, Integrating Cybersecurity and Enterprise Risk Management (December 2025)

  2. A manufacturer pays plant IT managers a bonus when their site reports no security events during the year. Over two years, reported near misses fall by 70%, while separate scans show no change in open weaknesses at the plants. How should the risk practitioner interpret these results?

    1. The bonus has reduced exposure, so the same design can be extended to other sites
    2. Near miss data has proved unreliable, so it should be taken out of risk reporting
    3. Plant IT managers need more training in using the reporting tool
    4. The bonus is discouraging reports, so leadership should review its design
    Show answer

    Answer: D. NIST describes culture as the values, beliefs and norms that influence how people act, and says culture affects the degree of risk an organization takes on. A bonus for reporting nothing rewards silence. Reports fell while the underlying weaknesses did not, which points to a reporting problem rather than lower risk, so the bonus needs a leadership decision.

    Source: NIST SP 800-39, Managing Information Security Risk, section 2.7 (March 2011)

  3. Senior leaders at an online insurer have set a low appetite for disruption to customer claims, and the claims service has a tolerance of 4 hours of unplanned outage per month. Last month the outage total reached 6 hours. The register still shows the risk as medium because ratings are refreshed once a year. What is the risk practitioner's BEST action?

    1. Report the tolerance breach to the risk owner and reassess the risk now
    2. Ask senior leaders to raise the tolerance to 6 hours to match recent outages
    3. Add the breach to the next quarterly report and rescore at the annual refresh
    4. Ask IT operations to add a redundant server before the business is told
    Show answer

    Answer: A. Measures exist to show when a tolerance has been exceeded, and a breach should reach the person accountable for the risk without waiting for a calendar date. Changing the tolerance to fit the result would defeat its purpose. Choosing a technical fix comes after the owner has seen the current exposure.

    Source: NIST IR 8286 Rev. 1, Integrating Cybersecurity and Enterprise Risk Management (December 2025)

  4. A bank's operational risk team, which sits in the second line, is asked to perform quarterly user access reviews for a trading platform because the platform's business managers say they are too busy. The same team would then report on whether those reviews are effective. What is the MAIN concern with this arrangement?

    1. Internal audit would no longer be able to include the platform in its plan
    2. The reviews would become more costly than any loss they could prevent
    3. The team would be monitoring and challenging work that it performs itself
    4. Platform users would gain access to reports held by the risk function
    Show answer

    Answer: C. In the IIA's Three Lines Model, management owns and manages risk and operates processes and controls, while second-line roles provide expertise, support, monitoring and challenge. Running the control and then judging it is a self-review risk, and the IIA statement lists independent review as a safeguard where such risks arise. It would also let management step back from a duty it holds. The better path is for the business to keep the reviews, with risk staff supporting and monitoring them.

    Source: The IIA, Three Lines Model: Assurance and Advice in Support of Effective Governance, Statement of Position (2026)

  5. A software firm's group policy keeps all customer data in one cloud region. A new subsidiary plans to sell in a country whose law may require local storage of its citizens' data, and it asks for a group policy exception so the launch stays on schedule. What should the risk practitioner do FIRST?

    1. Support the exception so that the subsidiary's launch date can be protected
    2. Have legal counsel confirm whether the local storage law applies here
    3. Design a local data store now so that the launch can stay on schedule
    4. Launch under the group policy and revisit the local law if a regulator raises it
    Show answer

    Answer: B. A law is a source of requirements, and an internal policy exception cannot waive it. The practitioner first needs to know whether the duty applies. Any gap can then be recorded with an accountable owner so leaders can choose a response. Picking a technical design or a launch path before that step would skip the decision. This scenario is exam study material, not legal advice.

    Source: NIST SP 800-37 Rev. 2, Risk Management Framework (December 2018)

  6. A risk workshop at a logistics firm produces this register entry: "Ransomware: high." The CIO says the entry gives no basis for deciding what to fund. Which revision would BEST make it useful for that decision?

    1. Add the CVSS score of the most severe vulnerability found on the company network
    2. Attach an industry report on average ransomware payment amounts
    3. List every server that lacks the latest endpoint protection agent
    4. Describe the likely attacker, target asset, entry route and business harm
    Show answer

    Answer: D. A label and a rating do not show what could happen or which control would change the outcome. Being specific about threat events and sources lets you model and analyze a scenario, and it ties the risk to business harm. A vulnerability score, an industry average or a server list each describes one piece and not the whole scenario.

    Source: NIST SP 800-30 Rev. 1, Guide for Conducting Risk Assessments (September 2012)

  7. A credit union can fund only one urgent fix this week. Flaw A has a CVSS score of 9.8 on an isolated test server with no production data and no known exploitation. Flaw B has a CVSS score of 7.5 on the internet-facing customer portal and is listed in the CISA Known Exploited Vulnerabilities catalog, with ransomware use noted. Which should the risk practitioner recommend, and why?

    1. Flaw A, because its higher score means it carries the greater risk
    2. Flaw A, because isolated systems can be patched with the least disruption
    3. Flaw B, because active exploitation and exposure raise its business risk
    4. Neither yet, because a penetration test should first confirm exploitability
    Show answer

    Answer: C. CVSS reflects the severity of a vulnerability, while risk also depends on exposure, likelihood and the asset involved. CISA tells organizations to use its catalog as an input to prioritization, and a listed flaw has already been exploited in the wild. Waiting for a penetration test would only delay the fix for a flaw already known to be in use.

    Source: CISA, Known Exploited Vulnerabilities Catalog

  8. A business impact analysis sets a maximum tolerable downtime of 10 hours for order processing, and the business owner confirms that limit cannot change because of customer shipping commitments. The latest recovery test restored the system in 14 hours. What should the risk practitioner recommend?

    1. Set the recovery time objective at 14 hours to match the proven capability
    2. Open a plan of action with dated steps to close the recovery gap
    3. Shorten the backup interval so that the recovery point objective can be met
    4. Repeat the test until one of the runs finishes inside the 10-hour limit
    Show answer

    Answer: B. The recovery time objective normally has to be shorter than the maximum tolerable downtime, so the current capability is a real gap. When the target cannot be met right away and the downtime limit is fixed, NIST guidance says a plan of action and milestones should document and address the situation. Backup frequency affects data loss, not how long recovery takes.

    Source: NIST SP 800-34 Rev. 1, Contingency Planning Guide for Federal Information Systems (2010)

  9. A customer data risk is rated high before controls and low after controls. The low rating assumes that a data loss prevention tool blocks outbound transfers. The risk practitioner learns the tool has run in monitor-only mode since installation because blocking caused complaints. How should the practitioner handle the rating?

    1. Rerate residual risk based on how the control actually operates
    2. Keep the low rating because the tool is installed and is watching the traffic
    3. Lower the inherent rating because monitoring gives the business early warning
    4. Keep the low rating and add a target date for blocking mode
    Show answer

    Answer: A. NIST says estimates of likelihood and impact should account for controls, and it describes actual residual risk as what remains after management has acted. A tool that only watches cannot deliver the reduction credited to a tool that blocks, so the low rating overstates protection. A planned move to blocking can be shown as a target, but it does not change today's rating. Inherent risk describes conditions with no intervention, so monitoring does not change it.

    Source: NIST IR 8286 Rev. 1, Integrating Cybersecurity and Enterprise Risk Management (December 2025)

  10. Residual risk on a customer portal exceeds tolerance, and the fix would come from the e-commerce division's budget. The IT director whose team maintains the portal emails the risk practitioner to say he accepts the risk so the team can move on. What is the BEST next step?

    1. Record the acceptance because the IT director runs the system day to day
    2. Ask the IT director to sign a formal acceptance form for the risk file
    3. Apply the fix from the IT budget and inform the division of it afterward
    4. Take the exposure and response options to the accountable risk owner
    Show answer

    Answer: D. The risk owner is the party accountable for keeping a risk within enterprise requirements, and running a system does not make someone that owner, so a signature from the IT director would not settle it. NIST lists acceptance as the response for risk within tolerance, and says that when residual risk is beyond the acceptable level the risk owner should evaluate whether it can be brought back to that level. The practitioner supports that decision by setting out the exposure and options, but does not make it.

    Source: NIST IR 8286 Rev. 1, Integrating Cybersecurity and Enterprise Risk Management (December 2025)

  11. A company's payroll, HR and expense vendors were each assessed separately and rated moderate. A new questionnaire shows that all three run on the same hosting provider, a firm the company has no contract with. What should the risk practitioner do NEXT?

    1. Keep the ratings because each vendor's contract covers its own hosting
    2. Assess the shared dependency as a concentrated enterprise-level risk
    3. Require all three vendors to move to different hosts within 30 days
    4. Sign a separate service contract directly with the hosting provider
    Show answer

    Answer: B. NIST supply chain guidance warns that third parties may receive critical input from a common fourth-party supplier, which creates exposure that a vendor-by-vendor view can miss. A single failure could hit all three services at once, so the combined impact has to be assessed. Contract changes or a required move are possible responses once that assessment is done.

    Source: NIST SP 800-161 Rev. 1 (update 1), Cybersecurity Supply Chain Risk Management Practices (November 2024)

  12. A plant's legacy control system cannot support the company's required multi-factor authentication, and its replacement is funded for delivery in 18 months. The system owner asks for an exception to the access standard. What should the risk practitioner advise?

    1. Grant a permanent exception because the vendor cannot support the standard
    2. Deny the exception and take the system offline until the replacement arrives
    3. Grant a time-limited exception with compensating controls and owner sign-off
    4. Reword the access standard so that the requirement is optional for old systems
    Show answer

    Answer: C. When a required control cannot be applied, NIST's framework points to compensating controls, which are used in place of the standard control to give equivalent or comparable protection. A time limit tied to the funded replacement and a named owner keep the exception visible and reviewable. A permanent exception or a weaker standard would hide the risk, and taking a plant system offline ignores the business impact.

    Source: NIST SP 800-37 Rev. 2, Risk Management Framework (December 2018)

  13. A company's low ransomware rating relies on immutable backups. The control owner supplies a configuration document and, in an interview, says the feature is working. Which step would give the STRONGEST evidence that the control works as intended?

    1. Have the backup administrator sign a statement confirming the settings in use
    2. Attempt to delete a protected backup, then restore data under test conditions
    3. Review the product guide for the vendor's stated claims about immutability
    4. Interview a second administrator who helped configure the product originally
    Show answer

    Answer: B. NIST describes three assessment methods: examine, interview and test. Testing exercises a mechanism under set conditions and compares its actual behavior with what is expected, so it shows what the control does. Documents and statements show what is meant to happen or what people believe happens, which is a weak basis for a low rating.

    Source: NIST SP 800-53A Rev. 5, Assessing Security and Privacy Controls (January 2022)

  14. A hospital is concerned about unauthorized access by former employees after a delay was found in the feed from HR to its identity system. Which metric would be the BEST key risk indicator for this concern?

    1. Percentage of identity help desk tickets closed within the agreed service level
    2. Number of managers who finished the annual access policy training course
    3. Number of incidents last year involving a former employee
    4. Count of departed staff accounts still enabled 24 hours after exit
    Show answer

    Answer: D. A key risk indicator measures the risk itself, and a leading indicator tracks conditions that come before an incident. Enabled accounts belonging to people who have left are the exposure in this scenario, and they can be acted on before any misuse. Ticket closure measures performance, training counts measure activity, and last year's incidents are a lagging view.

    Source: NIST SP 800-55 Vol. 1, Measurement Guide for Information Security (December 2024)

  15. Three regions of a multinational submit risk registers to head office. One uses a 1 to 5 scale, one uses high, medium and low, and one uses estimated dollar losses. The chief risk officer wants a single top ten list for the board next month. What should the risk practitioner do FIRST?

    1. Normalize the entries against common criteria before rolling them up
    2. Average each region's scores to produce one number for each listed risk
    3. Take the top three from each region and then add the highest remainder
    4. Ask each regional head to vote on which risks belong on the final list
    Show answer

    Answer: A. NIST describes lower-level registers being aggregated, normalized and prioritized into an enterprise risk profile. Scores on different scales cannot be compared or averaged in any meaningful way until they share common criteria. Quotas and votes produce a list, but not one that reflects relative exposure.

    Source: NIST IR 8286 Rev. 1, Integrating Cybersecurity and Enterprise Risk Management (December 2025)

  16. The owner of an action plan to patch 200 internet-facing servers reports the plan as complete. A validation scan finds the flaw still present on 60 of them, and the related key risk indicator has not moved. What should the risk practitioner do NEXT?

    1. Close the plan and open a separate new finding for the 60 remaining servers
    2. Record the plan as complete and list the 60 servers as an accepted risk
    3. Rescan with another tool in case the first result was wrong
    4. Keep the plan open, report actual status and agree on a new date
    Show answer

    Answer: D. NIST says a plan of action is used to monitor progress on the actions planned to correct deficiencies, so its status should reflect what validation shows. The unmoved indicator supports the scan, so a second tool would mostly add delay. Closing it would make the report inaccurate and hide that the risk has not fallen. Acceptance is a decision for the accountable risk owner, and it cannot be recorded by default to tidy up a status.

    Source: NIST SP 800-37 Rev. 2, Risk Management Framework (December 2018)

  17. A fintech's agile teams release every two weeks, with one security review at the end of each cycle. Flaws found late lead to repeated exception requests to hold the release date, and the list of accepted risks keeps growing. What should the risk practitioner recommend?

    1. Extend the final review to cover more of each release
    2. Move to one release per quarter so that reviewers have more time
    3. Build security requirements and testing into each stage
    4. Give the release manager authority to sign off every exception
    Show answer

    Answer: C. NIST's Secure Software Development Framework says secure practices should be integrated throughout the life cycle, whichever model is used. Addressing security early limits flaws that are costly to fix late, which removes the cause of the exceptions. A longer final review or slower releases would keep the same late discovery.

    Source: NIST SP 800-218, Secure Software Development Framework Version 1.1 (February 2022)

  18. At the end of a lease, a company must return storage drives that held customer records, and the lease does not allow the drives to be destroyed. The lessor will reissue them to other customers. Which decision BEST manages the data exposure?

    1. Use a clear method because the lessor is a trusted supplier under contract
    2. Use a purge method suited to the drive type, verify it and record the result
    3. Delete the files and reformat the drives because they will soon be reused
    4. Encrypt the records in place using a new key that the company retains
    Show answer

    Answer: B. These drives leave the company's control, so the sanitization decision has to account for that as well as the sensitivity of the data. NIST describes purge as making recovery infeasible even with laboratory techniques while leaving the media reusable, and says to prefer it to clear when possible. Verification and a record of the decision complete the process. Encrypting in place would send the drives out with the data still on them, and deleting and reformatting does not meet the purge standard.

    Source: NIST SP 800-88 Rev. 2, Guidelines for Media Sanitization (September 2025)

  19. An insurer wants to use a vendor's pre-trained language model to draft recommendations on denying claims. The vendor's documents rate the model as low risk for general text tasks. What should the risk practitioner require BEFORE approval?

    1. An assessment of this specific use and the harm from wrong denials
    2. Acceptance of the vendor's low rating, since it knows the model best
    3. Delivery of the vendor's full training data for an internal review
    4. A pilot on low-value claims with a formal review after one year
    Show answer

    Answer: A. The NIST AI Risk Management Framework notes that a developer offering a pre-trained model can see risk differently from the party deploying it in a particular use. Claim denials affect people directly, so the deployer has to frame the risk in that context. A pilot or a training data review might help later, but neither replaces assessing this use.

    Source: NIST AI 100-1, AI Risk Management Framework 1.0 (January 2023)

  20. A fitness app plans to send users' detailed location history to an insurance partner for pricing. The data feed is encrypted and access controlled, and the security team rated the risk low after finding no technical weaknesses. What is the risk practitioner's BEST response?

    1. Accept the low rating because strong encryption also covers the privacy risk
    2. Require the partner to encrypt the location data while it is stored
    3. Treat this as vendor risk and rely on the partner's security certificate
    4. Assess the privacy risk to users that arises from the sharing itself
    Show answer

    Answer: D. NIST's Privacy Framework says managing cybersecurity risk is not enough, because privacy risks can arise by means unrelated to a cybersecurity incident. Here the planned, authorized use of the data could cause problems for individuals even if every security control works. Stronger encryption does not change what the partner does with the data once it arrives.

    Source: NIST Privacy Framework Version 1.0 (January 2020)

Practise all 320 questions

What you get with VirtuePrep CRISC prep

  • 320 practice questions built around the topics the CRISC tests.
  • An explanation for every answer, so each mistake teaches you something.
  • Stats and history that show your weakest topics first.
  • Web, iPhone and Android, so you can study wherever you have ten minutes.

CRISC practice test questions people ask

What is the CRISC passing score as a percentage?
ISACA's candidate guide gives no percentage. You need a scaled score of 450 or higher on a 200 to 800 scale, and that scale is converted from your raw score, so 450 does not mean 45% or any other percent correct. ISACA also says domain percentages are not used to calculate the score.
What is the CRISC pass rate?
This page gives no CRISC pass rate because we could not find an ISACA statistics page that publishes one. Figures on other sites conflict and do not trace back to ISACA, so treat them with care.
How much does CRISC certification cost?
The exam costs US$575 for ISACA members and US$760 for nonmembers, and the application after you pass costs US$50 once. That makes US$625 or US$810 for one attempt, before membership dues and study materials. Each retake costs the full exam fee again.
How much does CRISC cost in India?
The ISACA pages used here list fees only in US dollars, at US$575 for members and US$760 for nonmembers. No price in rupees or pounds is confirmed, and local tax or bank charges are not covered, so check the amount at checkout on the ISACA site.
Is CRISC difficult?
ISACA gives no difficulty rating, so any answer is partly opinion. What you can plan around is 150 questions in four hours, about 96 seconds each, with questions that may turn on qualifiers such as BEST or MOST likely.
Is CRISC harder than CISM?
We found no official comparison. Both exams have 150 questions in four hours, so the real difference is content. CRISC centers on risk decisions and controls, while 62% of CISM sits in the security program and incident management. To judge which will be harder for you, check which outline is further from your daily work.
How long to study for CRISC?
We found no recommended hours from ISACA, and the time depends on your experience in each domain. Take a timed practice set first, then assign your hours by the official weights and move time toward your weak areas.
CRISC vs CISA, which should I choose?
Choose by the work you do or want. CISA has a domain on the auditing process and tests how you gather evidence and report assurance. CRISC has no audit domain and tests who owns a risk, whether it fits appetite and which response and metrics follow.
Which CRISC study guide should I use?
Use material written for the outline that took effect on November 3, 2025. A quick check is the weights, which should show Risk Assessment at 22% and Technology and Security at 20%. Older material shows those two the other way around.

Sources

Opened and checked on November 7, 2026. Fees and rules can change, so confirm them with ISACA before you pay.

VirtuePrep is not affiliated with or endorsed by the organisation that runs the CRISC. Exam names are trademarks of their owners. Practice questions are written for study and are not real exam questions. Page updated 2026-11-07.

Start your CRISC prep today

Answer your first question in under a minute. Free to try.

Start practising