AP Physics Practice Test
Practise for the AP Physics with 855 exam-style questions, an explanation for every answer and stats that show what to study next.
AP Physics practice questions and the 2027 exams at a glance
Below are 20 free AP Physics practice questions for College Board's AP Physics 1: Algebra-Based and AP Physics 2: Algebra-Based exams, with an explanation for every answer. Each one is labeled with its course and unit, such as "Physics 1: Fluids". They are newly written multiple-choice items. They are not real AP questions, and they are not a timed practice test.
In May 2027 both exams last 3 hours: 42 multiple-choice questions in 85 minutes, then 4 free-response questions in 95 minutes. Each section is worth half your score. AP Physics 1 is on Wednesday, May 5, 2027 (Session 2, typically the afternoon), and AP Physics 2 is on Thursday, May 6, 2027 (Session 1, typically the morning). Your AP coordinator confirms the exact start time. If you want more practice after these, VirtuePrep's AP Physics question set has 855 questions.
What are AP Physics 1 and AP Physics 2, and who can take them?
They are two algebra-based physics courses and exams from College Board's Advanced Placement Program. College Board describes Physics 1 as the equivalent of the first course in an introductory college sequence in algebra-based physics, and Physics 2 as the second.
College Board recommends that Physics 1 students have completed geometry and are taking Algebra II or an equivalent course at the same time. For Physics 2, it recommends completing AP Physics 1 or a comparable introductory course, plus precalculus taken before or alongside it. You do not have to take the course to sit the exam. You arrange the exam through an AP coordinator, either at your own school or at a local school or test center that gives it.
AP Physics C: Mechanics and AP Physics C: Electricity and Magnetism are separate exams that use calculus. They have the same layout of 42 multiple-choice and 4 free-response questions, but this page does not cover them. Physics C: Electricity and Magnetism is in the same Wednesday, May 5 Session 2 slot as Physics 1. If you want to take both, register for both and ask your AP coordinator about late testing for one of them.
AP Physics exam format for May 2027
The two algebra-based exams have the same structure, shown here from College Board's assessment pages for AP Physics 1 and AP Physics 2.
| Section | Questions | Time | Share of score |
|---|---|---|---|
| I: Multiple choice | 42 | 1 hr 25 min | 50% |
| II: Free response | 4 | 1 hr 35 min | 50% |
| Total | 46 | 3 hr | 100% |
College Board's clarifications for fall 2026 changed multiple choice from 40 questions in 80 minutes to 42 in 85, and cut free response from 100 to 95 minutes. A study guide written before that change will show the old numbers.
The four free-response questions always come in this order, and the points are the same in both courses:
| Question type | Points | Suggested time |
|---|---|---|
| Mathematical Routines | 10 | 20 to 25 min |
| Translation Between Representations | 12 | 25 to 30 min |
| Experimental Design and Analysis | 10 | 25 to 30 min |
| Qualitative/Quantitative Translation | 8 | 15 to 20 min |
The exam is hybrid digital. You answer the multiple-choice questions in the Bluebook app. For free response, you read the prompts in Bluebook but write your answers by hand in a paper booklet. Calculators are allowed on both sections: up to 2 approved handheld calculators, plus the Desmos calculator built into Bluebook. Each course also has its own Table of Information: Equations, which College Board provides in Bluebook and on paper.
One detail on gravity: both Tables of Information list g as 9.8 m/s^2, but a Unit 1 boundary statement in the Physics 1 CED says 10 m/s^2 will be used where a number is needed, with no penalty for 9.8 or 9.81. Use the value a question gives you. Every question on this page that needs g states it.
What the AP Physics 1 and 2 units cover
The current Course and Exam Descriptions (CEDs), effective fall 2024 with clarifications for 2026-27, split the content into 15 units: 8 in Physics 1 and 7 in Physics 2. The weights below are for the multiple-choice section only.
| AP Physics 1 unit | MC weight |
|---|---|
| 1 Kinematics | 10 to 15% |
| 2 Force and Translational Dynamics | 18 to 23% |
| 3 Work, Energy, and Power | 18 to 23% |
| 4 Linear Momentum | 10 to 15% |
| 5 Torque and Rotational Dynamics | 10 to 15% |
| 6 Energy and Momentum of Rotating Systems | 5 to 8% |
| 7 Oscillations | 5 to 8% |
| 8 Fluids | 10 to 15% |
| AP Physics 2 unit | MC weight |
|---|---|
| 9 Thermodynamics | 15 to 18% |
| 10 Electric Force, Field, and Potential | 15 to 18% |
| 11 Electric Circuits | 15 to 18% |
| 12 Magnetism and Electromagnetism | 12 to 15% |
| 13 Geometric Optics | 12 to 15% |
| 14 Waves, Sound, and Physical Optics | 12 to 15% |
| 15 Modern Physics | 12 to 15% |
Two placements are easy to get wrong. Fluids is Unit 8 of Physics 1. And Physics 1 has no electricity or waves unit at all: circuits, sound and mechanical waves are all in Physics 2. Older study guides may use a different layout, so compare a resource's unit names with the current CED before you rely on it.
How to split study time by the official weights
Start with the big units. In Physics 1, Units 2 and 3 together make up 36 to 46% of the multiple-choice section, while Units 6 and 7 together make up only 10 to 16%. Physics 2 is more even. Its first three units (thermodynamics, electric force and potential, circuits) carry 45 to 54%, and Units 12 to 15 (magnetism through modern physics) carry 48 to 60% between them.
One simple method is to split your hours in proportion to the midpoint of each range. For 20 hours of Physics 1 review, that works out to about 4 hours each on forces and on energy, about 2.4 hours each on kinematics, momentum, torque and fluids, and about 1.25 hours each on rotating systems and oscillations. This is our arithmetic on College Board's weights, not a College Board recommendation, so shift time toward the units where your practice scores are weakest.
Plan for the type of reasoning, too. The Physics 1 CED puts deriving a symbolic expression at 15 to 20% of multiple choice, and comparing scenarios and predicting changes at 10 to 15% each. That makes "by what factor" and "which expression" questions worth regular practice. For free response, write full answers by hand under time, and include at least one experimental design question.
Is there an official AP Physics practice test?
College Board does not offer a full-length AP practice test in Bluebook; that is only for the SAT and PSAT. Bluebook does have a test preview for AP Exams, so you can try the app's tools before exam day. For practice questions, College Board points students to AP Classroom.
College Board also posts past free-response questions with scoring guidelines for each course, covering the 2023 to 2026 exams as of November 2026. It warns that, because of the 2024-25 revisions, these do not fully match the current exams, so check each one against the current unit list. Marking your own handwritten answers against the official scoring guidelines shows you exactly where points are awarded.
What the CEDs limit or leave out
Each CED has boundary statements that limit what the exam asks. Some topics are left out, and others are tested only in words, without calculation. These ones can save you study time:
- Physics 1: no quantitative work with nonuniform acceleration, and collisions in two dimensions are treated only semiquantitatively.
- Physics 1: the direction of torque and angular momentum as a vector is beyond scope; rotation is described as clockwise or counterclockwise.
- Physics 2: the Doppler effect and the second law of thermodynamics are qualitative only.
- Physics 2: RC circuits are analyzed with numbers only at their initial and final states.
- Physics 2: you do not need to memorize specific decay paths or half-lives, and work functions are given when needed.
The practice questions on this page stay inside these limits. For other APs, see the AP Calculus, AP Chemistry and AP Biology pages, or browse all exams.
Cost and ordering deadlines
College Board lists $99 per exam for 2027 at schools in the U.S., U.S. territories, Canada and DoWEA schools, and $129 elsewhere, with a $37 fee reduction for students with significant financial need. Schools order exams by November 13.
For full-year and first-semester courses, orders from November 14 to March 12 add a $40 late fee per exam. If you decide after November 13 not to take an exam that was ordered for you, the charge is $40 instead of the full fee. You pay your school, not College Board, and your school may charge more to cover its costs.
How AP Physics is scored
Each exam is scored from 1 to 5, and there is no pass mark. College Board's score scale table calls a 3 Qualified, a 4 Very well qualified and a 5 Extremely well qualified. Each college sets the score it accepts for credit. Multiple choice is scored by the number of correct answers, and free response is scored by college professors and AP teachers at the AP Reading in the first two weeks of June.
College Board's score distribution pages show that 67.3% of 2025 AP Physics 1 test takers and 72.6% of 2025 AP Physics 2 test takers scored 3 or higher. These are shares of scores, not pass rates.
20 free AP Physics practice questions
Answer each one yourself, then open the answer. No account needed. These are study questions, not real exam questions.
-
A motion sensor records the velocity of a fan-driven cart moving along a straight, level track. At t = 0 s the velocity is 1.0 m/s, at 1.0 s it is 2.2 m/s, at 2.0 s it is 3.4 m/s, and at 3.0 s it is 4.6 m/s. Assume the velocity changes uniformly between readings. What is the cart's displacement from t = 0 s to t = 3.0 s?
- 5.4 m
- 8.4 m
- 11.1 m
- 13.8 m
Show answer
Answer: B. The velocity rises by 1.2 m/s every second and changes uniformly, so the acceleration is constant at 1.2 m/s^2. With constant acceleration, displacement equals the average velocity times the time: (1.0 + 4.6)/2 = 2.8 m/s, and 2.8 m/s x 3.0 s = 8.4 m. The same result comes from x = v0t + (1/2)at^2 = 3.0 m + 5.4 m. Using only the (1/2)at^2 term, which ignores the starting velocity, gives 5.4 m.
Source: OpenStax College Physics 2e, 2.5 Motion Equations for Constant Acceleration in One Dimension
-
A marble rolls off the edge of a horizontal lab bench at 2.0 m/s and lands on the floor 0.80 m from the foot of the bench. A second marble leaves the same edge horizontally at 4.0 m/s. Air resistance is negligible. How far from the foot of the bench does the second marble land?
- 0.80 m
- 1.1 m
- 1.6 m
- 3.2 m
Show answer
Answer: C. Both marbles start with zero vertical velocity and fall the same height, so they spend the same time in the air regardless of their horizontal speed. Horizontal velocity stays constant, so horizontal distance is proportional to launch speed. Doubling the speed from 2.0 m/s to 4.0 m/s doubles the distance from 0.80 m to 1.6 m.
-
Block 1 of mass m1 and block 2 of mass m2 sit side by side, touching, on a frictionless horizontal floor. A student pushes block 1 with a constant horizontal force of magnitude F, so block 1 pushes block 2 and both accelerate together. Which expression gives the magnitude of the force that block 1 exerts on block 2?
- F m2 / (m1 + m2)
- F m1 / (m1 + m2)
- F
- F m2 / m1
Show answer
Answer: A. Treat both blocks as one system: the only horizontal external force is F, so the shared acceleration is a = F / (m1 + m2). Now look at block 2 alone. The only horizontal force on it is the push from block 1, so that push equals m2 a = F m2 / (m1 + m2). It is less than F because part of the applied force goes into accelerating block 1.
Source: OpenStax College Physics 2e, 4.3 Newton's Second Law of Motion: Concept of a System
-
A 5.0 kg crate rests on a level floor. The coefficient of static friction between crate and floor is 0.40 and the coefficient of kinetic friction is 0.30. A worker pushes horizontally on the crate with a force of 15 N. Use g = 9.8 m/s^2. What is the magnitude of the friction force on the crate?
- 0 N
- 14.7 N
- 15 N
- 19.6 N
Show answer
Answer: C. The normal force is mg = 5.0 kg x 9.8 m/s^2 = 49 N, so static friction can supply up to 0.40 x 49 N = 19.6 N. The 15 N push is less than that, so the crate does not move. With zero acceleration, static friction exactly balances the push, so it is 15 N. The 19.6 N figure is only the maximum static friction could reach, and 14.7 N would apply only if the crate were sliding.
-
A block is pressed against a horizontal ideal spring, compressing it a distance x. When released, the block slides along a frictionless track and rises to a maximum height h on a curved ramp. The block is then reset and the spring is compressed a distance 2x. What maximum height does the block reach this time?
- 1.4h
- 2h
- 8h
- 4h
Show answer
Answer: D. With no friction, the spring's elastic potential energy (1/2)kx^2 becomes gravitational potential energy mgh at the highest point, so h is proportional to x^2. Doubling the compression multiplies the stored energy, and therefore the height, by 2^2 = 4. The block reaches 4h.
Source: OpenStax College Physics 2e, 7.4 Conservative Forces and Potential Energy
-
An electric hoist lifts a 60 kg crate of bricks 12 m straight up at constant speed in 8.0 s. Use g = 9.8 m/s^2. What average power does the hoist deliver to the crate?
- About 90 W
- About 880 W
- About 440 W
- About 7,100 W
Show answer
Answer: B. At constant speed the hoist's upward force equals the crate's weight, mg = 60 kg x 9.8 m/s^2 = 588 N. The work done is 588 N x 12 m = 7,056 J, and power is work divided by time: 7,056 J / 8.0 s = 882 W, or about 880 W. Because the kinetic energy stays the same, all of that work becomes gravitational potential energy.
-
On a level, frictionless track, a 1.5 kg cart moving at 4.0 m/s collides with a 0.50 kg cart at rest. The carts stick together and move off as one. What fraction of the system's initial kinetic energy is converted to other forms in the collision?
- 0%
- 25%
- 50%
- 75%
Show answer
Answer: B. Momentum is conserved: 1.5 kg x 4.0 m/s = 6.0 kg m/s, so the joined 2.0 kg carts move at 3.0 m/s. Initial kinetic energy is (1/2)(1.5)(4.0)^2 = 12 J and final kinetic energy is (1/2)(2.0)(3.0)^2 = 9.0 J. The 3.0 J lost is 3.0/12 = 25% of the initial kinetic energy. In this perfectly inelastic collision it goes mainly into internal energy and sound.
Source: OpenStax College Physics 2e, 8.5 Inelastic Collisions in One Dimension
-
A uniform 1.0 m board of mass 2.0 kg rests horizontally on a pivot at its center. A 3.0 kg mass hangs 0.20 m to the left of the pivot. Where must a 2.0 kg mass be hung so that the board stays horizontal and at rest?
- 0.13 m to the right of the pivot
- 0.20 m to the right of the pivot
- 0.30 m to the right of the pivot
- 0.45 m to the right of the pivot
Show answer
Answer: C. For rotational equilibrium, the clockwise and counterclockwise torques about the pivot must balance. The board's own weight acts at its center, right at the pivot, so it produces no torque. Balancing the hanging weights gives (3.0 kg)g(0.20 m) = (2.0 kg)g(d), so d = 0.30 m on the right side. The value of g cancels.
Source: OpenStax College Physics 2e, 9.2 The Second Condition for Equilibrium
-
A student sits on a stool that turns with negligible friction, holding dumbbells at arm's length. The rotational inertia of student, stool and dumbbells is 3.6 kg m^2 and the angular speed is 2.0 rad/s. The student pulls the dumbbells in, reducing the rotational inertia to 1.2 kg m^2. By what factor does the system's rotational kinetic energy change?
- It becomes 1/3 as large
- It stays the same
- It becomes 9 times as large
- It becomes 3 times as large
Show answer
Answer: D. No external torque acts about the axis, so angular momentum is conserved: 3.6 x 2.0 = 1.2 x final angular speed, which gives 6.0 rad/s. Rotational kinetic energy goes from (1/2)(3.6)(2.0)^2 = 7.2 J to (1/2)(1.2)(6.0)^2 = 21.6 J, a factor of 3. The extra energy comes from the work the student's arms do pulling the dumbbells inward.
Source: OpenStax College Physics 2e, 10.5 Angular Momentum and Its Conservation
-
A 0.50 kg block attached to a horizontal ideal spring oscillates on a frictionless surface with a period of 0.80 s and an amplitude of 4.0 cm. The block is replaced by a 2.0 kg block on the same spring, which is pulled out to an amplitude of 8.0 cm and released. What is the new period?
- 1.6 s
- 0.80 s
- 2.3 s
- 3.2 s
Show answer
Answer: A. The period of a mass-spring oscillator is T = 2 pi sqrt(m/k), and amplitude does not appear in it. Multiplying the mass by 4 multiplies the period by sqrt(4) = 2, so T = 2 x 0.80 s = 1.6 s. Doubling the amplitude changes nothing.
Source: OpenStax College Physics 2e, 16.3 Simple Harmonic Motion: A Special Periodic Motion
-
A solid block of wood floats in fresh water (density 1,000 kg/m^3) with 60% of its volume below the surface. The same block is placed in a salt solution with a density of 1,200 kg/m^3. What fraction of the block's volume is below the surface when it floats in the solution?
- 0.40
- 0.50
- 0.60
- 0.72
Show answer
Answer: B. A floating object displaces fluid whose weight equals its own weight, so the submerged fraction equals the object's density divided by the fluid's density. In water, 0.60 = density / 1,000 kg/m^3, so the wood's density is 600 kg/m^3. In the solution, the submerged fraction is 600 / 1,200 = 0.50. The denser fluid gives the same buoyant force with less volume displaced.
Source: OpenStax College Physics 2e, 11.7 Archimedes' Principle
-
Water (density 1,000 kg/m^3) flows steadily through a completely filled horizontal pipe. In the wide section the speed is 1.5 m/s. The pipe then narrows to one third of the wide section's cross-sectional area. Treat the water as an ideal fluid. How does the pressure in the narrow section compare with the pressure in the wide section?
- Higher by 9,000 Pa
- Lower by 4,500 Pa
- Lower by 18,000 Pa
- Lower by 9,000 Pa
Show answer
Answer: D. The continuity equation (A1v1 = A2v2) gives a narrow-section speed of 3 x 1.5 = 4.5 m/s. For a horizontal pipe, Bernoulli's equation gives P1 minus P2 = (1/2)(1,000)(4.5^2 minus 1.5^2) = 500 x 18 = 9,000 Pa. Pressure is lower where the fluid moves faster, so the pressure in the narrow section is 9,000 Pa lower.
Source: OpenStax College Physics 2e, 12.2 Bernoulli's Equation
-
A sample of ideal gas in a cylinder with a movable piston absorbs 500 J of energy by heating. At the same time the gas expands, pushing the piston outward and doing 200 J of work on the surroundings. What is the change in the internal energy of the gas?
- +300 J
- +700 J
- -300 J
- -700 J
Show answer
Answer: A. The AP Physics 2 Table of Information writes the first law as change in U = Q + W, where W is work done on the system. The gas does 200 J of work on the surroundings, so the work done on the gas is -200 J. The change in internal energy is 500 J + (-200 J) = +300 J, and the gas's temperature rises.
-
A proton starts from rest and is accelerated through a potential difference of 500 V in a vacuum. Use e = 1.60 x 10^-19 C and a proton mass of 1.67 x 10^-27 kg. What is the proton's final speed?
- 3.1 x 10^5 m/s
- 2.2 x 10^5 m/s
- 6.2 x 10^5 m/s
- 1.3 x 10^7 m/s
Show answer
Answer: A. The electric field does work qV on the proton, and all of it becomes kinetic energy: qV = (1.60 x 10^-19 C)(500 V) = 8.0 x 10^-17 J. Setting (1/2)mv^2 = 8.0 x 10^-17 J gives v = sqrt(2 x 8.0 x 10^-17 / 1.67 x 10^-27) = about 3.1 x 10^5 m/s. Dropping the factor of 2 gives 2.2 x 10^5 m/s, and using the electron mass instead gives 1.3 x 10^7 m/s.
Source: OpenStax College Physics 2e, 19.1 Electric Potential Energy: Potential Difference
-
An ideal 12 V battery is connected to a 4.0 ohm resistor in series with a parallel pair of resistors, one 6.0 ohm and one 3.0 ohm. What is the current in the 6.0 ohm resistor?
- 2.0 A
- 1.3 A
- 1.0 A
- 0.67 A
Show answer
Answer: D. The parallel pair has an equivalent resistance of (6.0 x 3.0)/(6.0 + 3.0) = 2.0 ohms, so the total resistance is 6.0 ohms and the battery current is 12 V / 6.0 ohms = 2.0 A. The 4.0 ohm resistor takes 8.0 V, leaving 4.0 V across both parallel branches. The current in the 6.0 ohm branch is 4.0 V / 6.0 ohms = 0.67 A; the 3.0 ohm branch carries the other 1.3 A.
Source: OpenStax College Physics 2e, 21.1 Resistors in Series and Parallel
-
An ideal 9.0 V battery, a 300 ohm resistor, an open switch and an uncharged 50 microfarad capacitor are connected in series. The switch is closed. Which choice gives the current immediately after the switch closes and the charge on the capacitor a long time later?
- 0 mA and 450 microcoulombs
- 30 mA and 450 microcoulombs
- 30 mA and 0 microcoulombs
- 15 mA and 225 microcoulombs
Show answer
Answer: B. An uncharged capacitor has no potential difference across it, so at the instant the switch closes the full 9.0 V is across the resistor and the current is 9.0 V / 300 ohms = 0.030 A, or 30 mA. As the capacitor charges, the current falls toward zero. Once the current stops, the capacitor's voltage equals the battery's 9.0 V, so Q = CV = (50 x 10^-6 F)(9.0 V) = 450 microcoulombs.
Source: OpenStax College Physics 2e, 21.6 DC Circuits Containing Resistors and Capacitors
-
A square wire loop 0.10 m on each side has a resistance of 0.50 ohm. It lies flat in a uniform magnetic field directed perpendicular to the plane of the loop. Over 0.30 s, the field strength increases steadily from 0.20 T to 0.80 T. What is the induced current in the loop during this time?
- 20 mA
- 53 mA
- 40 mA
- 400 mA
Show answer
Answer: C. The loop's area is (0.10 m)^2 = 0.010 m^2, so the magnetic flux changes by 0.010 m^2 x 0.60 T = 0.0060 T m^2. By Faraday's law, the induced emf is 0.0060 / 0.30 s = 0.020 V. The current is 0.020 V / 0.50 ohm = 0.040 A, or 40 mA. What matters is how much the field changes, not its final value.
Source: OpenStax College Physics 2e, 23.2 Faraday's Law of Induction: Lenz's Law
-
A small candle stands 15 cm in front of a thin converging lens with a focal length of 10 cm. Which choice describes the image?
- Virtual and upright, 30 cm from the lens on the candle's side, twice the candle's height
- Real and inverted, 6.0 cm from the lens on the far side, 0.4 times the candle's height
- Real and upright, 30 cm from the lens on the far side, twice the candle's height
- Real and inverted, 30 cm from the lens on the far side, twice the candle's height
Show answer
Answer: D. The thin lens equation gives 1/di = 1/10 minus 1/15 = 1/30, so di = +30 cm: a real image on the opposite side of the lens. The magnification is -di/do = -30/15 = -2, so the image is inverted and twice as tall. For a converging lens, any object placed between f and 2f gives a real, inverted, enlarged image.
Source: OpenStax College Physics 2e, 25.6 Image Formation by Lenses
-
A string 1.2 m long is fixed at both ends. Waves travel along it at 48 m/s. At what frequency must the string be driven to set up the third harmonic standing wave?
- 20 Hz
- 40 Hz
- 60 Hz
- 120 Hz
Show answer
Answer: C. A string fixed at both ends has nodes at each end, so its standing waves have wavelengths 2L/n. For the third harmonic, the wavelength is 2(1.2 m)/3 = 0.80 m. The frequency is v / wavelength = 48 m/s / 0.80 m = 60 Hz, which is three times the 20 Hz fundamental.
-
In a photoelectric experiment, a student shines monochromatic light on a metal plate and measures the maximum kinetic energy of the emitted electrons. Light of frequency 8.0 x 10^14 Hz gives a maximum kinetic energy of 1.00 eV. Light of frequency 1.2 x 10^15 Hz gives 2.66 eV. Based on these data, what is the work function of the metal?
- 2.3 eV
- 1.0 eV
- 1.7 eV
- 3.3 eV
Show answer
Answer: A. The maximum kinetic energy is K = hf minus the work function, so K plotted against f is a straight line with slope h. From the data, h = (2.66 minus 1.00) eV / (4.0 x 10^14 Hz) = about 4.15 x 10^-15 eV s. Then the work function = hf minus K = (4.15 x 10^-15)(8.0 x 10^14) minus 1.00 = 3.32 minus 1.00 = about 2.3 eV. The 3.3 eV value is the photon energy, not the work function.
Source: OpenStax College Physics 2e, 29.2 The Photoelectric Effect
What you get with VirtuePrep AP Physics prep
- 855 practice questions built around the topics the AP Physics tests.
- An explanation for every answer, so each mistake teaches you something.
- Stats and history that show your weakest topics first.
- Web, iPhone and Android, so you can study wherever you have ten minutes.
AP Physics practice test questions people ask
What is the passing score for AP Physics 1?
What is the AP Physics 1 pass rate?
How hard is AP Physics 1?
Do you get a formula sheet on the AP Physics 1 exam?
What is the difference between AP Physics and AP Physics C?
How much is the AP Physics 1 exam?
Is AP Physics 1 worth it?
Can I take the AP Exam if I haven't taken an AP course?
Sources
- AP Physics 1: Algebra-Based assessment, College Board
- AP Physics 2: Algebra-Based assessment, College Board
- AP Physics 1 Course and Exam Description, College Board
- AP Physics 2 Course and Exam Description, College Board
- AP Physics 1 CED Clarifications and Corrections, College Board
- AP Physics 2 CED Clarifications and Corrections, College Board
- AP Physics C: Mechanics assessment, College Board
- AP Physics C: Electricity and Magnetism assessment, College Board
- AP Physics 1 past exam questions, College Board
- AP Physics 2 past exam questions, College Board
- Bluebook practice and test previews, College Board
- 2027 AP Exam dates, College Board
- AP late testing, College Board
- AP calculator policies, College Board
- AP Exam fees, College Board
- AP Score Scale Table, College Board
- About AP scores, College Board
- AP Physics 1 score distributions, College Board
- AP Physics 2 score distributions, College Board
- Can I take the AP Exam if I haven't taken an AP course?, College Board
VirtuePrep is not affiliated with or endorsed by the organisation that runs the AP Physics. Exam names are trademarks of their owners. Practice questions are written for study and are not real exam questions. Page updated 2026-11-12.
More Education exams
ACCUPLACER
The Accuplacer doesn't have to be intimidating. Think of it as your first step toward college, not a roadblock.
EducationAP Biology
AP Biology covers a lot, cells, DNA, genetics, plants, evolution, and everything in between.
EducationAP Calculus
The AP Calc exam can feel like a punch in the gut the first time you try a practice problem.
EducationAP Chemistry
The AP Chemistry exam throws a lot at you, calculations, concepts, graphs, labs, and those long questions where one...
Start your AP Physics prep today
Answer your first question in under a minute. Free to try.