Education 715 practice questions

AP Chemistry Practice Test

Practise for the AP Chemistry with 715 exam-style questions, an explanation for every answer and stats that show what to study next.

Every answer explainedAn explanation for every answer as you practise.
Progress by topicSee which parts of the AP Chemistry need more work.
Short or full setsTen-minute sessions or longer timed practice.

AP Chemistry practice questions and the 2027 exam at a glance

This page has 20 free AP Chemistry practice questions for College Board's AP Chemistry Exam, each with an explanation for every answer. They are new multiple-choice items, spread across the nine units in rough proportion to their official weights. They are not real AP questions and not a full timed practice test.

The exam is on Thursday, May 6, 2027. It takes 3 hours 15 minutes: 60 multiple-choice questions in 90 minutes, then 7 handwritten free-response questions in 105 minutes, each section worth half your score.

If you want more, VirtuePrep has 715 AP Chemistry questions for practice by unit.

What is the AP Chemistry Exam, and who can take it?

The AP Chemistry Exam tests the AP Chemistry course, which College Board describes as equivalent to a one-year introductory college general chemistry course. College Board recommends high school chemistry and Algebra II first. The AP course itself is recommended but not required to sit the exam.

You cannot register on your own. You test at your school, or arrange through the AP coordinator of another school or testing center that offers the exam. Homeschooled students follow the same route and should start early.

AP Chemistry exam format for May 2027

College Board's AP Students page lists this format for the May 2027 exam.

Section Questions Time Share of score
I: Multiple choice 60, some standing alone and some in sets that share a diagram or data 1 hour 30 minutes 50%
II: Free response 7: three long questions worth 10 points each, four short questions worth 4 points each 1 hour 45 minutes 50%

It is a hybrid digital exam. You answer multiple choice in the Bluebook app, read the free-response questions in Bluebook, and write those answers by hand in a paper booklet. A periodic table and an equations and constants sheet are provided. That sheet, the AP Chemistry formula sheet, is printed as Appendix 2 of the CED, so practice with the same copy.

Calculators are allowed on both sections. Some summaries online say otherwise, so go by College Board's calculator policy: up to 2 approved handheld calculators, plus the Desmos calculator inside Bluebook.

What the AP Chemistry units cover

The current Course and Exam Description (CED), marked effective fall 2024, sets nine units. Its weights apply to the multiple-choice section only. College Board gives no unit weights for free response.

Unit Multiple-choice weight
1 Atomic Structure and Properties 7 to 9%
2 Compound Structure and Properties 7 to 9%
3 Properties of Substances and Mixtures 18 to 22%
4 Chemical Reactions 7 to 9%
5 Kinetics 7 to 9%
6 Thermochemistry 7 to 9%
7 Equilibrium 7 to 9%
8 Acids and Bases 11 to 15%
9 Thermodynamics and Electrochemistry 7 to 9%

Unit 3 is the big one. It covers intermolecular forces, the gas laws, solutions and how to separate them, photons and the Beer-Lambert law. Add Unit 8 and you have 29 to 37% of the multiple-choice section in two units.

The CED also weights science practices. Mathematical Routines is the largest in both sections: 35 to 42% of multiple choice and 43 to 53% of free response. So put calculation practice into every unit of your plan rather than saving it for one week at the end.

How to split study time by the official weights

One simple way to plan is to split your content time by the midpoint of each weight range. The midpoints add up to 89, so divide each one by 89. This is a planning method, not a College Board rule, and the hours below are rounded.

Unit Share of content study time Hours out of 100
Unit 3 about 22.5% 22.5
Unit 8 about 14.6% 14.6
Each of Units 1, 2, 4, 5, 6, 7 and 9 about 9% each 9.0 each

Then set aside separate time for free response, which is half your score. Multiple-choice practice won't teach you to handwrite multipart answers where you calculate, justify and explain. Practice those under time, on paper, with the equations sheet beside you.

Two adjustments help. Move hours toward the units where your practice scores are weakest. And keep a short daily block of calculations (moles, gas laws, pH, Faraday's law) going the whole way through.

What the CED says will not be tested

The CED lists topics that are excluded from the exam, and knowing them saves study time. They include colligative properties, interpreting phase diagrams, Arrhenius equation calculations, converting between Kc and Kp, Lewis acid-base concepts, rote solubility rules beyond the salts the CED names as always soluble (sodium, potassium, ammonium and nitrate), and calculating the pH change when acid or base is added to a buffer. The full list is spread across the CED's topic pages.

Cost and ordering deadlines

College Board lists the 2027 exam fee as $99 in the U.S., U.S. territories, Canada and DoWEA schools, and $129 at schools elsewhere. A $37 fee reduction is available per exam for students with significant financial need. For full-year courses, schools order exams by November 13. Exams ordered from November 14 to March 12 carry a $40 late fee on top of the exam fee, and an exam canceled or left untaken after the November deadline costs $40. Fees are paid through the school, so talk to your AP coordinator.

How AP Chemistry is scored

There is no passing score. Your multiple-choice score is the number you answer correctly. Readers score free response in June, and the weighted total is converted to the 1 to 5 scale. College Board labels 3 as Qualified. On its AP Chemistry score distribution page, 77.9% of 2025 test takers scored 3 or higher.

If you are choosing between science APs, see the AP Biology and AP Physics pages, or AP Calculus for the math side. All exams are listed on the exams page.

20 free AP Chemistry practice questions

Answer each one yourself, then open the answer. No account needed. These are study questions, not real exam questions.

  1. A colorless gas made only of carbon and hydrogen is analyzed and found to be 85.6% carbon by mass. A separate gas density experiment gives its molar mass as 56.1 g/mol. What is the molecular formula of the gas?

    1. CH2
    2. C2H4
    3. C4H8
    4. C4H10
    Show answer

    Answer: C. In 100 g there are 85.6 g C (85.6 / 12.01 = 7.13 mol) and 14.4 g H (14.4 / 1.008 = 14.3 mol). The ratio is 1 : 2, so the empirical formula is CH2, with a mass of 14.03 g/mol. Dividing 56.1 by 14.03 gives 4, so the molecular formula is C4H8. CH2 is only the empirical formula, C2H4 has a molar mass of 28.05 g/mol, and C4H10 has the wrong hydrogen ratio.

    Source: AP Chemistry Course and Exam Description, effective fall 2024, Topic 1.3, Elemental Composition of Pure Substances

  2. A student compares photoelectron spectra of gaseous sodium and magnesium atoms. How does the 1s peak in the magnesium spectrum compare with the 1s peak in the sodium spectrum?

    1. It appears at a higher binding energy with the same relative height, because magnesium has a greater nuclear charge.
    2. It appears at a lower binding energy, because magnesium has more electrons shielding the 1s electrons.
    3. It appears at the same binding energy, because both atoms have two 1s electrons.
    4. It appears at a higher binding energy with twice the relative height, because magnesium has two valence electrons.
    Show answer

    Answer: A. A peak's position shows the energy needed to remove an electron, and its height shows how many electrons are in that subshell. Magnesium has 12 protons against sodium's 11, so its 1s electrons are held more strongly and need more energy to remove. Both atoms have exactly two 1s electrons, so the relative heights match. Outer electrons do almost nothing to shield the 1s electrons from the nucleus.

    Source: AP Chemistry Course and Exam Description, effective fall 2024, Topic 1.6, Photoelectron Spectroscopy

  3. Three Lewis diagrams are proposed for the cyanate ion, OCN-, with carbon as the central atom and every atom having an octet. Which diagram is the best model according to formal charge?

    1. A double bond from O to C and a double bond from C to N, giving N a formal charge of -1
    2. A single bond from O to C and a triple bond from C to N, giving O a formal charge of -1
    3. A triple bond from O to C and a single bond from C to N, giving O +1 and N -2
    4. All three contribute equally, because each gives the ion a total charge of -1
    Show answer

    Answer: B. Formal charge is valence electrons minus nonbonding electrons minus bonds. With a single O to C bond and three lone pairs on O, oxygen has 6 minus 6 minus 1, a formal charge of -1, while C and N are both 0. The double-double structure puts the -1 on nitrogen, and the third structure has larger charges (+1 and -2). The best structure keeps formal charges small and puts the negative charge on the most electronegative atom, oxygen. Nonequivalent structures do not contribute equally just because their total charges match.

    Source: AP Chemistry Course and Exam Description, effective fall 2024, Topic 2.6, Resonance and Formal Charge

  4. A chemist wants to know which of four fluorides is polar. In each molecule, a single central atom is bonded only to fluorine atoms. Which molecule has a net dipole moment?

    1. CF4
    2. XeF4
    3. SF6
    4. SF4
    Show answer

    Answer: D. SF4 has four bonding pairs and one lone pair on sulfur, so VSEPR predicts a seesaw shape. The S-F bond dipoles do not cancel in that shape, so the molecule is polar. CF4 is tetrahedral, XeF4 is square planar (two lone pairs opposite each other) and SF6 is octahedral. Those shapes are symmetric, so their identical bond dipoles cancel.

    Source: AP Chemistry Course and Exam Description, effective fall 2024, Topic 2.7, VSEPR and Hybridization

  5. A rigid 2.00 L flask contains 0.150 mol of N2 and 0.050 mol of O2 at 27 °C. Assuming ideal behavior, what is the partial pressure of O2? (R = 0.08206 L atm/(mol K))

    1. 0.0554 atm
    2. 0.616 atm
    3. 1.85 atm
    4. 2.46 atm
    Show answer

    Answer: B. Convert the temperature: 27 + 273.15 = 300.15 K. The total pressure is nRT/V = (0.200)(0.08206)(300.15) / 2.00 = 2.46 atm. The mole fraction of O2 is 0.050 / 0.200 = 0.25, so its partial pressure is 0.25 x 2.46 = 0.616 atm. 0.0554 atm comes from using 27 instead of a kelvin temperature, 1.85 atm is the N2 partial pressure and 2.46 atm is the total.

    Source: AP Chemistry Course and Exam Description, effective fall 2024, Topic 3.4, Ideal Gas Law

  6. Samples of He, H2, N2 and NH3 are each held at 0 °C and 1 atm. Which claim, with its reasoning, best identifies the gas whose behavior differs most from the ideal gas law?

    1. H2, because its molecules are the lightest diatomic particles and collide with the walls most often
    2. N2, because it has the largest molar mass of the four gases and so the largest particles
    3. NH3, because its polar molecules attract each other through hydrogen bonding
    4. He, because a monatomic gas has no bonds to absorb energy during collisions
    Show answer

    Answer: C. Deviations from ideal behavior come mainly from attractions between particles, especially near conditions that cause condensation, and from particle volume at very high pressure. At 1 atm, particle volume matters little, so attractions decide the answer. NH3 is polar and forms hydrogen bonds, giving it by far the strongest intermolecular attractions of the four, and it condenses at a much higher temperature than the others. Molar mass, collision frequency and a lack of bonds do not by themselves make a gas non-ideal.

    Source: AP Chemistry Course and Exam Description, effective fall 2024, Topic 3.6, Deviation from Ideal Gas Law

  7. A student builds a Beer-Lambert calibration curve for a dye. Before measuring the unknown, the student rinses the cuvette with distilled water and fills it with the unknown without drying it, so a few drops of water mix into the sample. How does this affect the calculated concentration of the original unknown?

    1. It will be lower than the true value, because the diluted sample absorbs less light.
    2. It will be higher than the true value, because the water adds to the measured absorbance.
    3. It will be unchanged, because the molar absorptivity of the dye does not depend on concentration.
    4. It will be unchanged, because the path length of the cuvette is the same.
    Show answer

    Answer: A. At a fixed wavelength and path length, absorbance is proportional to the concentration of the absorbing species (A = εbc). The leftover water dilutes the unknown, so its absorbance comes out too low, and so does the concentration read from the calibration curve. Distilled water does not absorb at the dye's wavelength, and a constant molar absorptivity and path length do not cancel a real change in concentration.

    Source: AP Chemistry Course and Exam Description, effective fall 2024, Topic 3.13, Beer-Lambert Law

  8. A photochemistry experiment uses light with a wavelength of 410 nm. What is the energy carried by one mole of these photons? (h = 6.626 x 10^-34 J s, c = 2.998 x 10^8 m/s, Avogadro's number = 6.022 x 10^23 per mol)

    1. 4.85 x 10^-22 kJ/mol
    2. 0.292 kJ/mol
    3. 2.92 x 10^5 kJ/mol
    4. 292 kJ/mol
    Show answer

    Answer: D. One photon has E = hc / wavelength = (6.626 x 10^-34)(2.998 x 10^8) / (410 x 10^-9 m) = 4.85 x 10^-19 J. Multiplying by 6.022 x 10^23 gives 2.92 x 10^5 J/mol, which is 292 kJ/mol. The other values come from skipping Avogadro's number, or from slipping a factor of 1,000 in the joule to kilojoule conversion.

    Source: AP Chemistry Course and Exam Description, effective fall 2024, Topic 3.12, Properties of Photons

  9. Aluminum reacts with chlorine gas: 2 Al(s) + 3 Cl2(g) → 2 AlCl3(s). A reaction vessel holds 5.40 g of Al and 10.65 g of Cl2. If the reaction goes to completion, what mass of AlCl3 forms? (Al = 26.98 g/mol, Cl2 = 70.90 g/mol, AlCl3 = 133.33 g/mol)

    1. 13.4 g
    2. 26.7 g
    3. 20.0 g
    4. 16.1 g
    Show answer

    Answer: A. There are 5.40 / 26.98 = 0.200 mol Al and 10.65 / 70.90 = 0.150 mol Cl2. Using up all the Al would take 0.300 mol Cl2, so Cl2 is the limiting reactant. It gives 0.150 x 2/3 = 0.100 mol AlCl3, which is 0.100 x 133.33 = 13.4 g. 26.7 g assumes Al is limiting, 20.0 g treats Cl2 and AlCl3 as forming 1 : 1, and 16.1 g adds the two reactant masses as if both were used up, although Al is in excess.

    Source: AP Chemistry Course and Exam Description, effective fall 2024, Topic 4.5, Stoichiometry

  10. A student mixes aqueous lead(II) nitrate with aqueous potassium iodide, and a bright yellow solid forms. Which equation is the net ionic equation for this reaction?

    1. Pb(NO3)2(aq) + 2 KI(aq) → PbI2(s) + 2 KNO3(aq)
    2. K+(aq) + NO3-(aq) → KNO3(s)
    3. Pb2+(aq) + 2 I-(aq) → PbI2(s)
    4. Pb2+(aq) + 2 NO3-(aq) + 2 K+(aq) + 2 I-(aq) → PbI2(s) + 2 K+(aq) + 2 NO3-(aq)
    Show answer

    Answer: C. All potassium and nitrate salts are soluble, so KNO3 stays dissolved and the yellow solid must be PbI2. A net ionic equation leaves out spectator ions, here K+ and NO3-, which appear unchanged on both sides. That leaves Pb2+(aq) + 2 I-(aq) → PbI2(s). The first option is the molecular equation and the last is the complete ionic equation.

    Source: AP Chemistry Course and Exam Description, effective fall 2024, Topic 4.2, Net Ionic Equations

  11. The decomposition of a compound A is studied at constant temperature. A plot of ln[A] against time is a straight line with a slope of -0.0578 per minute. How long does it take [A] to fall from 0.800 M to 0.100 M?

    1. 12.0 min
    2. 36.0 min
    3. 24.0 min
    4. 138 min
    Show answer

    Answer: B. A linear plot of ln[A] against time means the reaction is first order, with k = 0.0578 per minute. The half-life is 0.693 / 0.0578 = 12.0 min. Going from 0.800 M to 0.100 M is three halvings (0.800 to 0.400 to 0.200 to 0.100), so the time is 3 x 12.0 = 36.0 min. The integrated rate law gives the same answer: t = ln(0.800 / 0.100) / 0.0578 = ln 8 / 0.0578 = 36.0 min. 12.0 min is one half-life, 24.0 min is two, and 138 min comes from dividing 8 by k without taking the natural log.

    Source: AP Chemistry Course and Exam Description, effective fall 2024, Topic 5.3, Concentration Changes Over Time

  12. The proposed mechanism for the reaction X2(g) + 2 Y2(g) → 2 XY2(g) is: Step 1, fast and reversible: X2 ⇌ 2 X. Step 2, slow: X + Y2 → XY2 (this step occurs twice). Which rate law is consistent with this mechanism?

    1. Rate = k[X][Y2]
    2. Rate = k[X2][Y2]^2
    3. Rate = k[X2][Y2]
    4. Rate = k[X2]^(1/2)[Y2]
    Show answer

    Answer: D. The slow step sets the rate: rate = k2[X][Y2]. X is an intermediate, so it must be replaced using the fast pre-equilibrium. From step 1, K = [X]^2 / [X2], so [X] = (K[X2])^(1/2). Substituting gives rate = k[X2]^(1/2)[Y2]. A rate law cannot contain an intermediate, and the overall coefficients do not set the orders for a multistep reaction.

    Source: AP Chemistry Course and Exam Description, effective fall 2024, Topic 5.9, Pre-Equilibrium Approximation

  13. A student finds the enthalpy of dissolution of NH4NO3 in a coffee-cup calorimeter. The solid dissolves slowly and the temperature drops. The cup is not well insulated, so some heat flows in from the warmer room during the run. How does this error affect the calculated molar enthalpy of dissolution?

    1. It will be positive but smaller than the true value, because the measured temperature drop is too small.
    2. It will be positive but larger than the true value, because extra heat entered the solution.
    3. It will come out negative, because heat flowed into the calorimeter from the room.
    4. It will be unaffected, because the specific heat of the solution does not change.
    Show answer

    Answer: A. Dissolving NH4NO3 is endothermic, so the solution cools, and the student calculates heat absorbed from q = mc(ΔT). Heat leaking in from the room partly offsets the cooling, so the recorded temperature drop is smaller than it would be in a perfect calorimeter. A smaller drop gives a smaller calculated q, so the enthalpy is still positive but too small. The specific heat is fine; the error is in ΔT.

    Source: AP Chemistry Course and Exam Description, effective fall 2024, Topic 6.4, Heat Capacity and Calorimetry

  14. For N2O4(g) ⇌ 2 NO2(g), Kc = 4.6 x 10^-3 at a certain temperature. A flask at that temperature contains [N2O4] = 0.050 M and [NO2] = 0.020 M. Which statement is correct?

    1. Q = 0.40, so the reaction proceeds in the reverse direction.
    2. Q = 8.0 x 10^-3, so the reaction proceeds in the forward direction.
    3. Q = 8.0 x 10^-3, so the reaction proceeds in the reverse direction.
    4. Q = 0.40, so the reaction proceeds in the forward direction.
    Show answer

    Answer: C. Q = [NO2]^2 / [N2O4] = (0.020)^2 / 0.050 = 8.0 x 10^-3. Because Q is greater than K (4.6 x 10^-3), there is too much product relative to equilibrium, so the net reaction runs in reverse, forming N2O4 and lowering [NO2]. Q = 0.40 comes from forgetting to square [NO2]. A forward shift would only happen if Q were smaller than K.

    Source: AP Chemistry Course and Exam Description, effective fall 2024, Topic 7.10, Reaction Quotient and Le Chatelier's Principle

  15. A sparingly soluble salt MX2 has Ksp = 4.0 x 10^-12 at 25 °C. What is the molar solubility of MX2 in a 0.010 M solution of the soluble salt NaX?

    1. 1.0 x 10^-4 M
    2. 4.0 x 10^-8 M
    3. 4.0 x 10^-10 M
    4. 2.0 x 10^-6 M
    Show answer

    Answer: B. MX2(s) ⇌ M2+(aq) + 2 X-(aq), so Ksp = [M2+][X-]^2. With 0.010 M X- already present and s small, Ksp = s(0.010)^2, so s = 4.0 x 10^-12 / 1.0 x 10^-4 = 4.0 x 10^-8 M. 1.0 x 10^-4 M is the solubility in pure water (from 4s^3 = Ksp), which the common ion lowers. 4.0 x 10^-10 M comes from forgetting to square [X-]. 2.0 x 10^-6 M treats the salt as if it gave one ion of each kind (s squared = Ksp) and ignores the common ion.

    Source: AP Chemistry Course and Exam Description, effective fall 2024, Topic 7.12, Common-Ion Effect

  16. A food chemist prepares a 0.10 M solution of a monoprotic weak acid with Ka = 1.8 x 10^-5. What is the pH of the solution?

    1. 1.00
    2. 4.74
    3. 5.74
    4. 2.87
    Show answer

    Answer: D. For a weak acid with little ionization, [H3O+] is about the square root of Ka x C = the square root of (1.8 x 10^-5)(0.10) = 1.34 x 10^-3 M, so pH = 2.87. That is about 1.3% ionization, small enough for the approximation to hold. pH 1.00 treats the acid as strong, 4.74 is the pKa and 5.74 skips the square root.

    Source: AP Chemistry Course and Exam Description, effective fall 2024, Topic 8.3, Weak Acid and Base Equilibria

  17. A lab needs a buffer at pH 4.50. Four weak acids and their sodium salts are available: HA (pKa 3.20), HB (pKa 4.40), HC (pKa 6.10) and HD (pKa 7.50). Which choice gives the required pH with the best buffering against both added acid and added base?

    1. HA and NaA, with [A-]/[HA] of about 20
    2. HB and NaB, with [B-]/[HB] of about 0.79
    3. HB and NaB, with [B-]/[HB] of about 1.3
    4. HC and NaC, with [C-]/[HC] of about 0.025
    Show answer

    Answer: C. A buffer resists pH change best in both directions when the acid and conjugate base are present in similar amounts, which happens when the pKa is close to the target pH. HB's pKa of 4.40 is closest. From pH = pKa + log([B-]/[HB]), log of the ratio is 4.50 minus 4.40, which is 0.10, so the ratio is 10^0.10 = 1.3. A ratio of 0.79 would give pH 4.30, and the HA and HC options need very lopsided ratios, which buffer poorly in one direction.

    Source: AP Chemistry Course and Exam Description, effective fall 2024, Topic 8.9, Henderson-Hasselbalch Equation

  18. A student titrates 25.0 mL of 0.100 M HA, a weak monoprotic acid with Ka = 1.3 x 10^-5, with 0.100 M NaOH. Which statement best describes the solution at the equivalence point?

    1. Its pH is 7.00, because the moles of NaOH added equal the moles of HA present at the start.
    2. Its pH is above 7, because the A- ions formed are a weak base that reacts with water.
    3. Its pH is below 7, because some HA molecules remain un-ionized in the solution.
    4. Its pH equals the pKa of HA, because HA and A- are present in equal amounts.
    Show answer

    Answer: B. At the equivalence point, all the HA has been converted to A-, so the major species are Na+, A- and water. A- is the conjugate base of a weak acid, so it takes protons from water (A- + H2O ⇌ HA + OH-), and the solution is basic. Equal moles of acid and base give a neutral solution only when both are strong. pH equals pKa at the half-equivalence point, after 12.5 mL of NaOH, not at the equivalence point. Almost no HA is left at equivalence, so leftover acid does not set the pH.

    Source: AP Chemistry Course and Exam Description, effective fall 2024, Topic 8.5, Acid-Base Titrations

  19. For a certain process, ΔH = +58.0 kJ/mol and ΔS = +176 J/(mol K). Assume both stay constant with temperature. At which temperature is the process thermodynamically favored?

    1. 250 K
    2. 298 K
    3. 320 K
    4. 350 K
    Show answer

    Answer: D. A process is thermodynamically favored when ΔG, equal to ΔH minus TΔS, is negative. Converting ΔS to 0.176 kJ/(mol K), ΔG becomes negative above 58.0 / 0.176 = 330 K. At 350 K, ΔG = 58.0 minus 350(0.176), which is -3.6 kJ/mol. At 320 K it is still +1.7 kJ/mol, and at lower temperatures it is more positive.

    Source: AP Chemistry Course and Exam Description, effective fall 2024, Topic 9.3, Gibbs Free Energy and Thermodynamic Favorability

  20. A jeweler plates copper onto a pendant from a Cu2+ solution, running a constant current of 2.50 A for 30.0 minutes. What mass of copper is deposited? (Cu = 63.55 g/mol, F = 96,485 C per mole of electrons)

    1. 1.48 g
    2. 2.96 g
    3. 0.0247 g
    4. 0.741 g
    Show answer

    Answer: A. Charge = current x time = 2.50 A x 1,800 s = 4,500 C. That is 4,500 / 96,485 = 0.0466 mol of electrons. Each Cu2+ needs 2 electrons, so 0.0233 mol Cu is deposited, which is 0.0233 x 63.55 = 1.48 g. 2.96 g ignores the 2 electrons per ion, 0.741 g divides by 2 a second time, and 0.0247 g leaves the time in minutes instead of seconds.

    Source: AP Chemistry Course and Exam Description, effective fall 2024, Topic 9.11, Electrolysis and Faraday's Law

Practise all 715 questions

What you get with VirtuePrep AP Chemistry prep

  • 715 practice questions built around the topics the AP Chemistry tests.
  • An explanation for every answer, so each mistake teaches you something.
  • Stats and history that show your weakest topics first.
  • Web, iPhone and Android, so you can study wherever you have ten minutes.

AP Chemistry practice test questions people ask

What is the passing score for AP Chemistry?
There is no pass mark. College Board reports AP scores from 1 to 5, and its score scale table labels a 3 as Qualified, a 4 as Very well qualified and a 5 as Extremely well qualified. Each college decides which score, if any, earns credit or placement, so check the policy of the colleges you care about.
What is the AP Chemistry pass rate?
Because the exam has no pass mark, the closest official figure is the share of students scoring 3 or higher. College Board's AP Chemistry score distribution page shows 77.9% of 2025 test takers at 3 or higher (168,833 students, mean score 3.36). The same page shows 76% for 2026, without a test-taker count.
Can you use a calculator on the AP Chemistry exam?
Yes, on both sections. College Board recommends a scientific or graphing calculator; a four-function model is allowed but not recommended. You can bring up to 2 approved handheld calculators, and Bluebook also has a built-in Desmos calculator. Calculators with wireless or internet access, a camera or a QWERTY keypad are not allowed.
How much does the AP Chem exam cost?
For 2027 exams, College Board lists $99 per exam in the U.S., U.S. territories, Canada and DoWEA schools, and $129 at schools elsewhere. Students with significant financial need can get a $37 College Board fee reduction per exam. Your school may charge more to cover administration, and you pay through your AP coordinator, not online.
How hard is AP Chemistry?
College Board publishes no difficulty rating. It does publish the scope: the course matches a one-year introductory college general chemistry course, and the Mathematical Routines practice (calculating, estimating and working with equations) carries 35 to 42% of the multiple-choice section and 43 to 53% of free response. If algebra and unit conversions are slow for you, build that speed early.
Is AP Chemistry worth it?
That depends on your plans and on the colleges you apply to, since each one sets its own credit and placement policy for AP scores. College Board describes the course as equivalent to a one-year introductory college general chemistry course, so it fits students heading toward science, engineering or health programs. Check a college's AP credit page before counting on credit.
Can I take the AP Exam if I haven't taken an AP course?
Yes. College Board recommends the course but does not require it. You arrange the exam through your school's AP coordinator, or, if your school does not offer it, through a local school or testing center that does.
I'm homeschooled. How can I take the AP Chemistry Exam?
You cannot order the exam yourself. Find a school or testing center that gives AP Chemistry and ask its AP coordinator whether you can test there. Reach out early, since schools set their own deadlines for outside students and place exam orders by mid-November. After that, College Board says a school may still add you at its discretion, and a late order fee can apply.

Sources

VirtuePrep is not affiliated with or endorsed by the organisation that runs the AP Chemistry. Exam names are trademarks of their owners. Practice questions are written for study and are not real exam questions. Page updated 2026-11-12.

Start your AP Chemistry prep today

Answer your first question in under a minute. Free to try.

Start practising