DANB CDA Practice Test
Practise for the DANB CDA with 814 exam-style questions, an explanation for every answer and stats that show what to study next.
The DANB CDA exam is a set of three separate tests from the Dental Assisting National Board: General Chairside Assisting (GC), Infection Control (ICE) and Radiation Health and Safety (RHS). Together they are 245 questions in 195 minutes and cost $450 in 2026. You must reach a scaled score of 400 on each one and pass all three within five years, either together or separately.
What is a DANB CDA certification?
CDA stands for Certified Dental Assistant. DANB is the organization, and the CDA is the credential it awards. That clears up the "DANB vs CDA" question.
A CDA is a national certification, not a license to perform a given duty. Each state dental board decides which duties can be delegated to assistants, and passing an exam gives authority only where the state recognizes it. Before you plan around a duty or an exam, look up your state in DANB's state directory. Seven states are listed there with DANB-administered state exams.
DANB CDA requirements: who can take each exam
RHS and ICE have no eligibility requirements. GC requires one of three pathways, plus current hands-on CPR, BLS or ACLS from a DANB-accepted provider. That card must stay valid through your whole 60-day testing window.
- Pathway I: you graduated from a dental assisting or dental hygiene program accredited by the Commission on Dental Accreditation (CODA), or you hold a registered dental hygienist (RDH) license from any state except Alabama. Students within 90 days of graduating can apply with an Intent to Graduate form.
- Pathway II: you have a high school diploma or equivalent and at least 3,500 work hours, built up over two to four years and verified by a licensed dentist.
- Pathway III: you are a former CDA, or you have a qualifying dental degree background or DANB-accepted post-baccalaureate program. The details are specific, so read page 4 of the application packet.
If you are still working toward Pathway II, you can take RHS and ICE first. Just keep the five-year limit in mind, because all three passes must fall inside it.
DANB CDA exam outline: what each exam covers
| Exam | Questions | Minutes | Domains and weights |
|---|---|---|---|
| GC | 95 | 75 | Evaluation 17%, Patient Management and Administration 17%, Chairside Dentistry 50%, Dental Materials 16% |
| ICE | 75 | 60 | Prevention of Disease Transmission 20%, Prevention of Cross-contamination 34%, Process Instruments and Devices 26%, Occupational Safety and Administration Protocols 20% |
| RHS | 75 | 60 | Purpose and Technique 50%, Radiation Characteristics and Protection 25%, Infection Prevention and Control 25% |
| All three | 245 | 195 |
The three exams ask you to think in different ways. GC is the broadest, covering charting and medical emergencies, dental dams, oral surgery support, cements and gypsum. ICE is about procedure and sequence: what to do with a barrier, a pouch or a failed spore test. RHS leans on image problem solving, such as working out what caused an error and how to correct it.
Every candidate gets the same percentage of questions from each domain, so you can plan around these weights. They come from DANB's outlines for GC, ICE and RHS. Each outline also lists the detailed topics and suggested references, so it works as a study checklist.
How the DANB CDA exam works
Questions are multiple choice with three or four options and one best answer. The exam is adaptive, and you cannot skip a question and come back to it. You must answer every question to receive a pass or fail result.
You can test at a Pearson VUE center or through remote online proctoring. At a center, breaks need proctor approval and the clock keeps running. Online, no breaks are allowed. An acronym list is available during the exam, and results reach your DANB account in 1 to 3 business days.
How to study for the CDA exam
This split comes from arithmetic and is our suggestion, not a DANB recommendation. GC makes up about 39% of the 245 questions, and ICE and RHS about 31% each. For every 10 hours you study, that works out to roughly 4 hours on GC, 3 on ICE and 3 on RHS.
Then divide each block by the domain weights. Of your 4 GC hours, 2 go to Chairside Dentistry and the rest is shared almost evenly across the other three domains. Of your 3 RHS hours, about 1.5 go to Purpose and Technique. Of your 3 ICE hours, cross-contamination gets the most, at about 1 hour.
One rule overrides the arithmetic: each exam is passed on its own. Strong GC scores cannot rescue a weak RHS, so move hours toward whichever exam is your weakest. If you take the exams separately, divide your time only across the exams you have left.
One sensible order, again our suggestion, is ICE before RHS, because a quarter of RHS covers infection control around imaging and draws on some of the same CDC guidance. DANB also posts study guide plans, including 6, 10 and 12 week versions for GC.
Check older study guides against current rules
Two points are worth checking in older material. The first is film: RHS has tested digital radiography only since July 7, 2022, so you can skip film processing chapters when you study for RHS.
The second is shielding. The ADA no longer recommends thyroid collars or abdominal shielding for dental imaging, though state laws may still require certain equipment. The RHS outline still lists shielding as a protection factor, and we do not know how current exam questions treat it, so learn both the ADA position and your state's rule.
DANB CDA practice test options
The 20 free questions on this page are split roughly in line with each exam's share of questions and its domain weights: 8 GC, 6 ICE and 6 RHS. They were written for practice and are not real exam questions. The VirtuePrep question bank holds 814 DANB CDA questions, with an explanation for every answer. DANB's exam page also links to DALE Foundation practice tests. No practice set guarantees a result, so use your misses to decide what to study next.
What the DANB CDA costs in 2026
| Option | Traditional | Active military |
|---|---|---|
| CDA, all three | $450 | $425 |
| RHS/ICE, ICE/GC or RHS/GC | $375 | $365 |
| RHS only | $270 | $265 |
| ICE only | $270 | $265 |
| GC only | $270 | $265 |
All fees include the $75 nonrefundable application fee. These are 2026 prices, and DANB accepts 2026 applications through Dec. 31, 2026, so check the current packet after that date. At the traditional price, three single exams bought separately cost $810, so the $450 bundle saves $360 if you are ready for all three in one 60-day window.
If you cannot test within your window, you can request a new 60-day window one time, within 60 days after the original window ends. A missed appointment, even from arriving late, an unacceptable ID or a technical problem online, can be rescheduled one time at a reduced fee if you apply within 60 days of the missed date. If you decide not to test, you can request a partial refund before the window expires: DANB keeps the $75 processing fee, plus $40 once the exam is authorized.
There is no limit on retaking a failed exam, but you must reapply and pay the full fee, and state law may require more education after a failed attempt.
DANB CDA renewal requirements
Certification runs for one year. To renew a CDA alone, you need 12 continuing education credits, of which 2 must cover infection control and 1 must cover bloodborne pathogens. You also need current CPR, which does not count toward the credits, and you pay $75.
If you miss the date, you have a three-month grace period with a $20 late fee. After that you are no longer certified and must contact DANB about reinstatement, which in some cases means retesting. Keep your course and CPR records for two years, because DANB audits a percentage of certificants each year. If you are not selected for audit, your new certificate and wallet card follow your renewal.
20 free DANB CDA practice questions
Answer each one yourself, then open the answer. No account needed. These are study questions, not real exam questions.
-
During an exam, the dentist stands facing the patient and dictates a mesio-occlusal amalgam on the patient's lower left first molar. Using the Universal system, which tooth number should the assistant chart?
- #14
- #19
- #30
- #3
Show answer
Answer: B. Universal numbering starts at the patient's upper right third molar (#1), runs across the upper arch to #16, then drops to the lower left third molar (#17). Counting forward from there, the lower left second molar is #18 and the first molar is #19. Sides always refer to the patient, whichever way the dentist is facing.
Source: StatPearls, Anatomy, Occlusal Contact Relations and Mandibular Movements
-
A patient sees the anesthetic syringe on the tray, turns pale and clammy, and says the room is going gray. The patient is still responsive. What should the assistant do first while alerting the dentist?
- Raise the chair upright and have the patient lean forward with the head between the knees
- Offer a few sips of water and encourage slow breathing while the patient stays seated upright
- Stop, move the syringe out of sight, and lay the patient flat with the legs level with or just above the head
- Stop, and recline the chair only partway with the head raised so that the patient can breathe more easily
Show answer
Answer: C. These are warning signs of vasovagal syncope. Stopping, removing the trigger and placing the patient supine with the legs level with or slightly above the head helps blood return to the heart and restores flow to the brain. MedlinePlus keeps sitting forward with the head between the knees for when a person cannot lie down, and a dental chair reclines. If the patient does not respond and is not breathing normally, call emergency services and start basic life support.
-
The parent of a 2-year-old with several erupted primary teeth asks how much toothpaste to use. Which advice fits current ADA guidance?
- A smear of fluoride toothpaste no bigger than a grain of rice, with an adult supervising
- A pea-sized amount of fluoride toothpaste, with the child brushing alone to build the habit
- A fluoride-free toothpaste until the child turns 6, then a small amount of fluoride toothpaste
- A full strip of fluoride toothpaste along the brush, rinsed away with water right after brushing
Show answer
Answer: A. For children under 3, the ADA advises brushing as soon as teeth appear, using no more than a rice-grain-sized smear of fluoride toothpaste. The pea-sized amount applies from ages 3 to 6. Adults supervise so the child uses the right amount.
-
While helping isolate a molar with a dental dam, the assistant sees the clamp rock when lightly pressed and notices it is not fully seated on the tooth. What is the best next step?
- Tie floss to the clamp and place the dam, leaving the clamp where it sits
- Have the patient bite on a cotton roll to steady the clamp during treatment
- Continue with the dam and rely on high-volume suction if the clamp lifts off
- Alert the dentist so the clamp can be reseated or changed for one that fits
Show answer
Answer: D. A clamp that does not fit the tooth or is not fully seated can come loose, and a loose clamp can be swallowed or aspirated. The fit should be corrected before the dam goes on, since a floss tie does not seat a clamp. Which isolation duties an assistant may perform depends on state rules.
Source: Alkhatib, Bissasu and Daud, Dental floss ties for rubber dam isolation, J Prosthodont, 2023
-
A first molar has been etched, rinsed and dried for a resin sealant and looks frosty white. Just before the sealant goes on, the patient's tongue moves the cotton roll and saliva wets the surface. What should happen next?
- Restore isolation, re-etch the contaminated surface, then rinse and dry before sealing
- Dry the surface with clean air until it looks frosty again, then place the sealant
- Blot the surface with a dry cotton pellet, then place the sealant right away
- Place a thicker layer of sealant over the area and extend the light-curing time
Show answer
Answer: A. Saliva entering the etched enamel blocks the resin from forming tags, which weakens retention, so the surface is etched again once a dry field is back. Moisture control is the main factor in whether a sealant holds. Who may place sealants depends on the state's dental practice rules.
-
The dentist has started nitrous oxide and oxygen on a talkative patient, and the scavenging system is running. Which step will best limit waste gas reaching the team's breathing zone?
- Raise the nitrous oxide flow so the patient relaxes and stops talking
- Lift the nasal hood away each time the patient wants to say something
- Ask the patient to limit talking and confirm the mask fits properly
- Prop the operatory door open while the nitrous oxide is being given
Show answer
Answer: C. A nasal scavenging mask does not capture gas the patient breathes out through the mouth. OSHA's guidance says to encourage the patient to minimize talking and mouth breathing while the mask is in place, and to fit the mask snugly over the nose. The ADA's nitrous oxide page lists the same patient steps, alongside a scavenging system, leak checks and venting exhaust outdoors.
Source: OSHA, Anesthetic Gases: Guidelines for Workplace Exposures
-
Three days after a lower molar extraction, a patient calls. Pain that had been settling is now getting worse, spreads along the jaw and is not eased by pain relievers, and there is a bad odor. How should the assistant respond?
- Explain that this is part of normal healing and ask the patient to call again in a week
- Tell the dentist this may be dry socket and arrange for the patient to be seen promptly
- Advise the patient to rinse forcefully several times a day to clear debris out of the socket
- Ask the patient to stop taking pain relievers so that the true pain level can be assessed
Show answer
Answer: B. Radiating pain that increases within days of an extraction, is not relieved by analgesics and comes with bad breath fits alveolar osteitis. The assistant does not diagnose by phone, but this pattern should go to the dentist for evaluation, where irrigation and other measures can be considered.
Source: StatPearls, Alveolar Osteitis
-
An alginate impression has been rinsed and spray-disinfected, but no one can pour it for about an hour. Which handling best protects its accuracy?
- Leave it uncovered on the bench so that the surface moisture can dry off
- Submerge it fully in a bowl of water until someone is free to pour it
- Immerse it in disinfectant until the pour so it stays both wet and clean
- Keep it in a closed, humid container and pour it as soon as possible
Show answer
Answer: D. Alginate loses water through syneresis and evaporation and swells when it absorbs water through imbibition, so either extreme distorts it. A humid environment, such as a moistened paper towel around the impression, reduces these changes while it waits, and pouring promptly is still the goal. Immersing alginate in disinfectant can distort it, so spraying is commonly used instead.
-
Midway through a composite restoration, you notice that a bur has torn the fingertip of your glove. What should you do?
- Remove the gloves as soon as it is safe to pause, wash your hands, and put on new gloves
- Pull a second glove over the damaged one and carry on until the procedure is complete
- Wipe the torn area with alcohol hand rub and change gloves after you finish the next step
- Wash your gloved hands at the sink and carry on once the glove has dried completely
Show answer
Answer: A. CDC guidance calls for removing damaged gloves as soon as feasible and washing hands before putting on a new pair. A torn glove no longer protects you or the patient. Do not wash gloves, because washing can create tiny holes.
Source: CDC, Guidelines for Infection Control in Dental Health-Care Settings, 2003
-
After dismissing a patient, you turn over a room where the light handle and chair switch were covered with plastic barriers. Which sequence follows CDC guidance?
- Leave barriers that look clean in place and add a second layer on top for the next patient
- Remove the barriers after taking off gloves, so clean hands handle them, then add new barriers
- Remove the barriers while gloved, clean and disinfect only if soiled, then add clean barriers
- Remove the barriers while gloved, disinfect every surface, then leave the surfaces uncovered
Show answer
Answer: C. Barriers come off while you are still gloved, and then you check the surface beneath. It needs cleaning and disinfecting only if it is visibly contaminated. Once gloves are off and hand hygiene is done, clean barriers go on for the next patient.
Source: CDC, Guidelines for Infection Control in Dental Health-Care Settings, 2003
-
You are setting up for the surgical removal of an impacted third molar, which will involve cutting bone. Which irrigant setup fits CDC guidance?
- Water from the handpiece line, after flushing it for a full 30 seconds
- Sterile saline from a bulb syringe or a single-use sterile delivery system
- Sterile water poured into the dental unit's independent water bottle
- Unit water that has recently tested below 500 CFU/mL on a waterline test
Show answer
Answer: B. Oral surgery exposes normally sterile tissue, so the coolant or irrigant should be sterile saline or sterile water. A conventional dental unit cannot reliably deliver sterile water, even with an independent reservoir, so a bulb syringe, a single-use sterile product or equipment that bypasses the unit is used. The 500 CFU/mL standard applies to routine, nonsurgical treatment water.
Source: CDC, Guidelines for Infection Control in Dental Health-Care Settings, 2003
-
The weekly spore test on a steam sterilizer comes back positive. The printouts and chemical indicators for that load looked normal, and no implantable items were processed. What should you do first?
- Keep using the sterilizer and repeat the spore test at next week's regular time
- Recall and re-sterilize every instrument the sterilizer has processed this year
- Keep running loads with a longer cycle time until a negative result comes back
- Take the sterilizer out of service, review procedures, and repeat the test right away
Show answer
Answer: D. With normal mechanical and chemical results, one positive spore test probably does not mean the sterilizer has failed, but you still have to check. The sterilizer comes out of service, operating procedures are reviewed, and the test is repeated immediately using the same cycle. If the repeat test is also positive, the sterilizer stays out of service and items from suspect loads back to the last negative spore test are recalled.
Source: CDC, Best Practices for Sterilization Monitoring in Dental Settings
-
A steam cycle ends with a normal printout and the expected external indicator change, but the pouches are still damp when you open the door. What should you do with them?
- Move them to a closed cabinet right away so that they stay protected while they dry
- Let them dry inside the sterilizer, then handle them and store them in a closed cabinet
- Blot each pouch with a clean, dry towel so that the next load can start right away
- Open each pouch and air-dry the instruments on a clean tray beside the sterilizer
Show answer
Answer: B. CDC says packages should dry in the sterilizer before anyone handles them, because handling them wet risks contamination. Once they are cool and dry, the wrap is checked for damage before use, and sterile items go in covered or closed cabinets where possible. A package that has been compromised is recleaned, repacked and resterilized.
Source: CDC, Guidelines for Infection Control in Dental Health-Care Settings, 2003
-
While clearing a tray after a local anesthetic injection, you are stuck through your glove by the used needle. What should you do?
- Wash the site with soap and water, and report the exposure right away to the designated person
- Soak the site in diluted bleach, and report the exposure at the end of the working day
- Rinse the site with water, and report the exposure only if the patient has a known infection
- Finish clearing the tray, cover the site with a bandage, and record it at the next staff meeting
Show answer
Answer: A. First aid for a puncture wound is soap and water, with no caustic agents such as bleach. The exposure is reported immediately so a qualified health-care professional can evaluate it, because timing matters for any treatment. Under the OSHA Bloodborne Pathogens Standard, the employer then arranges a confidential post-exposure evaluation and follow-up.
Source: CDC, Guidelines for Infection Control in Dental Health-Care Settings, 2003
-
A premolar bitewing shows proximal contacts overlapping, so the dentist cannot judge the spaces between the teeth. Which correction should you make on the retake?
- Increase the vertical angle so the beam points more steeply at the receptor
- Lengthen the exposure time so that the image shows more contrast at contacts
- Adjust the horizontal angle so the beam passes through the contact areas
- Reduce the vertical angle so the beam runs flatter toward the receptor
Show answer
Answer: C. Overlapped contacts come from horizontal misalignment. The beam should pass through the contact points, with the open end of the position indicating device horizontally parallel to the buccal surfaces of the teeth. Vertical angle errors change the apparent length of teeth instead, showing up as foreshortening or elongation.
Source: Dentalcare CE559, Technique Errors, Intraoral Imaging
-
A digital periapical image has an opaque white zone along one side, while the rest of the image looks normal. Which change is most likely to fix this on a retake?
- Raise the exposure time so more radiation reaches the whole of the sensor
- Rotate the tubehead horizontally to open up the contacts in the image
- Replace the sensor, since a white zone means that the sensor has cracked
- Re-center the beam toward the unexposed area and check the holder setup
Show answer
Answer: D. This is a cone-cut: part of the receptor was outside the beam, and on a digital image that area appears white or opaque. The beam should be moved toward the unexposed area and centered on the receptor. Checking the holder assembly confirms the whole receptor sits inside the indicator ring.
Source: Dentalcare CE559, Technique Errors, Intraoral Imaging
-
A patient arrives for a panoramic image wearing glasses, hoop earrings, a tongue ring and hearing aids. What should you do before positioning the patient?
- Have the patient remove all of these items, since metal near the head and neck can cause artifacts
- Leave all of these items in place, since imaging software can filter metal out of the final image
- Remove only the tongue ring, since items outside the mouth will fall away from the diagnostic area
- Leave all of these items in place, and take a second image only if an artifact is clearly visible
Show answer
Answer: A. Metal objects in the head and neck region can produce artifacts on a panoramic image, including ghost images that interfere with diagnosis. Removing them before positioning and exposure avoids a retake and the extra radiation that comes with it.
Source: Dentalcare CE589, Patient Preparation, Practical Panoramic Imaging
-
A dentist wants to reduce the amount of patient tissue exposed on each intraoral image, in line with ALARA and without giving up diagnostic value. Which change does this most directly?
- Lengthening the exposure time so that fewer images need to be retaken
- Switching to a faster receptor so that a shorter exposure time can be used
- Using a wider round beam so that the receptor is always fully covered
- Using rectangular collimation to limit the beam to the area being examined
Show answer
Answer: D. Collimation restricts the size of the beam. The ADA describes rectangular collimation as limiting the beam to the area that needs to be examined, which fits the ALARA goal of keeping necessary exposure as low as reasonably achievable. A faster receptor lowers dose but does not make the beam smaller. A smaller beam needs careful alignment to avoid a cone-cut retake.
Source: ADA, X-Rays/Radiographs
-
An operatory has a wall-mounted x-ray unit, but no protective barrier for the operator. Where should you stand during the exposure, subject to any state rule that is stricter?
- About 3 feet from the tubehead, standing directly behind it
- About 6 feet from the source, directly in line with the primary beam
- About 6 feet from the source, at more than 90 degrees to the primary beam
- Beside the patient in a lead apron, holding the receptor steady in place
Show answer
Answer: C. A protective barrier that lets you watch the patient is the first choice. Without one, staying about 6 feet (2 meters) from the x-ray source and at an angle greater than 90 degrees to the primary beam (90 to 135 degrees) keeps you out of the direct beam and uses distance to lower your dose.
Source: Dentalcare CE584, Operator Dose Reduction, Radiographic Selection Criteria
-
You remove the FDA-cleared barrier from a digital sensor after a patient's bitewings, and it looks intact. The maker says the sensor cannot be heat-sterilized or high-level disinfected. What should you do before the next patient?
- Place a new barrier without further steps, since the old barrier stayed intact
- Clean and disinfect it with an EPA-registered, intermediate-level hospital disinfectant
- Wipe off any moisture with dry gauze and put a new barrier on the sensor
- Wipe it with a low-level disinfectant that does not carry a tuberculocidal claim
Show answer
Answer: B. CDC notes that barriers can fail, so the sensor is still cleaned and disinfected after the barrier comes off. For a sensor that cannot be heat-sterilized or high-level disinfected, CDC calls for an FDA-cleared barrier at a minimum, then an EPA-registered hospital disinfectant with intermediate-level (tuberculocidal claim) activity between patients. Follow the sensor maker's instructions for compatible products.
Source: CDC, Guidelines for Infection Control in Dental Health-Care Settings, 2003
What you get with VirtuePrep DANB CDA prep
- 814 practice questions built around the topics the DANB CDA tests.
- An explanation for every answer, so each mistake teaches you something.
- Stats and history that show your weakest topics first.
- Web, iPhone and Android, so you can study wherever you have ten minutes.
DANB CDA practice test questions people ask
How many questions are on the CDA exam?
How many questions can you miss on the CDA exam?
Is the CDA exam hard?
What is the DANB CDA exam passing score?
How much does the DANB CDA cost?
How long is DANB certification good for?
Sources
- DANB, CDA exam page
- DANB, 2026 CDA application packet, updated 05/13/26
- DANB, 2026 candidate handbook, updated 6/22/2026
- DANB, recertification requirements, updated 5/15/2026
- DANB, GC exam outline, effective 07/01/2022
- DANB, ICE exam outline, effective 03/12/2025
- DANB, RHS exam outline, effective 03/12/2025
- DANB, 4 important details to know about DANB exams
- DANB, study guides
- DANB, state requirements
- DANB, reports
- DALE Foundation, CDA practice tests
- ADA News, thyroid collars no longer recommended, Feb. 1, 2024
VirtuePrep is not affiliated with or endorsed by the organisation that runs the DANB CDA. Exam names are trademarks of their owners. Practice questions are written for study and are not real exam questions. Page updated 2026-11-07.
More Medical exams
Start your DANB CDA prep today
Answer your first question in under a minute. Free to try.